Found a Hop up part have not tryed it yea but I just passing the word Link.
http://www.thefastman.com/index.asp

http://www.hemitruckclub.com/MrHemi%...ar/hellwig.htm

__________________
06 Ram 1500 Q-Cab 4X2 3.7, Manual 6 Speed, Ram Air intake Duct, K&N drop In filter, Dash Cover, Rino spray in bed liner, Hellwig rear Anti Sway Bar.
I could of gotten V-8, I should gotten the V-8.

I wonder how much more gas that sucks?

It's all up to you lead Foot.

__________________
06 Ram 1500 Q-Cab 4X2 3.7, Manual 6 Speed, Ram Air intake Duct, K&N drop In filter, Dash Cover, Rino spray in bed liner, Hellwig rear Anti Sway Bar.
I could of gotten V-8, I should gotten the V-8.

Translation: Lots!

__________________
'03 Dodge Ram 1500 RCSB, V6, 2WD, stock

Patriot Blue

Mods to come:
Exhaust
Powerwire
CAI/Jeep mod
Wheels/Tires
Turbo/intercooler/etc.

Here some more Parts for our trucks.

http://cgi.ebay.com/ebaymotors/Lift-...QQcmdZViewItem

http://www.hemitruckclub.com/MrHemi%...ar/hellwig.htm

__________________
06 Ram 1500 Q-Cab 4X2 3.7, Manual 6 Speed, Ram Air intake Duct, K&N drop In filter, Dash Cover, Rino spray in bed liner, Hellwig rear Anti Sway Bar.
I could of gotten V-8, I should gotten the V-8.

have u ever had any experience with those front end lift springs?

__________________

No I have not.

I like the spindles lifts my self you'r putting a lot more stress on the front end parts with longer springs you most likly will go though ball joints faster and MITE have a problem keeping the front end in Straight you mite be wearing out tires faster I dont know.

I always did spring lift on my Straight axle 4X4 I not to sure about this IFS how it will hold up..

I just going to pay mine Off and trade it in for a Dodge MegaCab 1500 4X4 with a Hemi I dont want to sink anymore money in to this truck I not planning to keep it.

It's a nice truck just to undered powered for me.

__________________
06 Ram 1500 Q-Cab 4X2 3.7, Manual 6 Speed, Ram Air intake Duct, K&N drop In filter, Dash Cover, Rino spray in bed liner, Hellwig rear Anti Sway Bar.
I could of gotten V-8, I should gotten the V-8.

oh. Is there any way by chance I could see some pictures of your truck marv02? Other thing is, where may i find spindle leveling kits?

__________________

Try this links for a spindle kit

http://www.canuckmotorsports.com/index.html

http://www.cstsuspension.com/product...4/productID/37

http://www.fabtechmotorsports.com/ap...05ram1500.html

I been busy with other things I was doing a Poker run the other weekend and blew up my Bike melted the piston and had to push back for the last 2 or 3 miles That sucked.
I gotten the OK from the wife to buy a New Bike this has been what I been doing looking at alot of bikes seening which one will be best for me I wanted new but I found a Tricked out used one thats6 monthold one.

Have have one in mind now just have to get a loan to buy it now.

As for a picture of the truck mine nothing looks stock I not going to put any more money in to it just drive it untill it's payed off then wait 6 months then trade it in for a hemi Q-Cab or Mega Cab.

__________________
06 Ram 1500 Q-Cab 4X2 3.7, Manual 6 Speed, Ram Air intake Duct, K&N drop In filter, Dash Cover, Rino spray in bed liner, Hellwig rear Anti Sway Bar.
I could of gotten V-8, I should gotten the V-8.

Ok thanks. I am actually looking at getting the roughcountry 3" lift kit for my pickup. How's the newer bike?

__________________