i have a stock engine andi was thinking about adjusting my boost to 20psi. Is there gonna be a chance that im gonna blow up my engine?

Assuming you have stage 3 ... then no 20psi is fine. By stock engine I'm guessing stock internals.... so what are your mods ?

shouldn't this be in the drivetrain section?

yes it should be, but if u have a stage 3, 20psi is fine but if you dont, 16psi at the max

yah all my internals are stock... alright, thanks guys!

ORIGINAL: blue_srt4

shouldn't this be in the drivetrain section?


yes, it should have been. better late than never;)

and sorry bout the edit on your post, hit edit instead of quote. still getting used to the extra buttons:eek:

it's very dangerous to "assume" anything. if you're going to play with boost put a wideband in.

maybe you can help me out here psichick already posted "I need injectors" but what would be the best size injectors for a full satge 3 system i plan on pulling the motor and building it all

you're going to build the motor and only use a s3 turbo? ok well you can go as small as the s2/s3 680's or as large as 825's (assuming you're using a fuel controller)