Badge removal

Printable Version

Dodge Forums >> Dodge Trucks >> Dodge Dakota >> 3rd Gen Dakota >> Badge removal

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

Badge removal - 8/12/2007 5:59:08 PM    texasbluedak   Posts: 91 Joined: 6/1/2007 Status: offline Does anyone know how to remove the rear (on the tailgate) ram head? Is all I need is just a heat gun and some adhesive remover? Post #: 1

RE: Badge removal - 8/12/2007 7:55:31 PM    Frenchy Third Gen Dakota King Posts: 5346 Joined: 12/11/2003 From: United States Status: offline Spider Wire 10lb test line, a little heat, and some adhesive remover... Simple to do... Took me all of about an hour, to remove all the logos on the rear, and the door moldings... _____________________________ Click me if you want me at the Dodge Forum Meet and Greet (in reply to texasbluedak) Post #: 2

RE: Badge removal - 8/12/2007 7:56:01 PM    Frenchy Third Gen Dakota King Posts: 5346 Joined: 12/11/2003 From: United States Status: offline Oh ya, and a pair of gloves, that Spider Wire will destroy your hands with out them _____________________________ Click me if you want me at the Dodge Forum Meet and Greet (in reply to Frenchy) Post #: 3

RE: Badge removal - 8/12/2007 8:18:04 PM    texasbluedak   Posts: 91 Joined: 6/1/2007 Status: offline Ok, so are we talking heatgun heat or hairdryer heat, or San Antonio, Texas heat! Then just run the spiderwire underneath and remove extra adhesive? Recommend a good adhesive remover? Thanks! (in reply to Frenchy) Post #: 4

RE: Badge removal - 8/12/2007 8:35:05 PM    Frenchy Third Gen Dakota King Posts: 5346 Joined: 12/11/2003 From: United States Status: offline San Antonio heat should be fine, I did mine in Michigan heat... And...... honestly, WD-40... _____________________________ Click me if you want me at the Dodge Forum Meet and Greet (in reply to texasbluedak) Post #: 5

RE: Badge removal - 8/12/2007 8:48:14 PM    texasbluedak   Posts: 91 Joined: 6/1/2007 Status: offline Cool, I didn't know it would be that easy. I've got the spider wire in the tackle box, gloves and wd-40 in the shed, and I'll go by Autozone in the morning and get a good adhesive remover! Thanks for helping me out. (in reply to Frenchy) Post #: 6

RE: Badge removal - 8/12/2007 9:02:39 PM    Frenchy Third Gen Dakota King Posts: 5346 Joined: 12/11/2003 From: United States Status: offline Noooooooooooooo! The WD-40 IS THE adhesive remover! Works GREAT!!!! Just wash and wax it afterwards.... _____________________________ Click me if you want me at the Dodge Forum Meet and Greet (in reply to texasbluedak) Post #: 7

RE: Badge removal - 8/12/2007 9:11:05 PM    Altair DodgeForum Moderator Posts: 4639 Joined: 3/10/2007 Status: offline Remember, with WD40 and Duct Tape you can fix anything. If it moves and it shouldn't, use the Duct Tape If it doesn't move and it should, use the WD40  _____________________________ quote: ORIGINAL: batman13 i liked the first clinton, he shot from below the belt..... (in reply to Frenchy) Post #: 8

RE: Badge removal - 8/14/2007 6:50:28 AM    curtiplas Posts: 1357 Joined: 2/23/2007 Status: offline Me and my friend debadged his Stratus R/T a couple weeks ago... we used a hair dryer, Goo Gone and the lil' plastic scraper that comes with the Goo Gone... came off easy!... and kept most of the adheasive on the badges... _____________________________ Dakota SLT 3.7L V6 4X2 6-SPD Manual http://www.cardomain.com/ride/2583201 (in reply to Altair) Post #: 9

RE: Badge removal - 8/14/2007 8:55:59 AM    4x4QC06V8DKTA   Posts: 446 Joined: 7/23/2007 From: Manassas, VA Status: offline now why would you wanna remove the Dodge Emblem off the back? _____________________________ 5% Tint Autolite 3923 Spark Plugs Injen Cold Air Intake Flowmaster 40 Series (dumps in front of passenger tire) Stillen Cross Drilled Rotors W/ Ceramic Brake Pads Fastman 68.50 Throttle Body All Fluids Royal Purple Future Mods JBA Head (in reply to curtiplas) Post #: 10

RE: Badge removal - 8/14/2007 9:19:11 AM    Frenchy Third Gen Dakota King Posts: 5346 Joined: 12/11/2003 From: United States Status: offline Clean look... end of story.. _____________________________ Click me if you want me at the Dodge Forum Meet and Greet (in reply to 4x4QC06V8DKTA) Post #: 11

RE: Badge removal - 8/14/2007 11:15:35 AM    texasbluedak   Posts: 91 Joined: 6/1/2007 Status: offline Well the badge will get mother natures heat gun today since it will be 100 today with a heat index of 105. No need for the heat gun!! I am going to try and take it off this evening. I want it off because I am think about having Mr. Kling send me a monster ram head like on Turbo's truck, but I am going to center it on the back tail gate where the ram badge was. What does everyone think? I've looked at his a 100 times and keep thinking it would look awesome seeing that from behind. Not a huge one maybe 6-8" one in black. (in reply to Frenchy) Post #: 12

RE: Badge removal - 8/14/2007 12:17:27 PM    4x4QC06V8DKTA   Posts: 446 Joined: 7/23/2007 From: Manassas, VA Status: offline yeah that would look pretty beast! _____________________________ 5% Tint Autolite 3923 Spark Plugs Injen Cold Air Intake Flowmaster 40 Series (dumps in front of passenger tire) Stillen Cross Drilled Rotors W/ Ceramic Brake Pads Fastman 68.50 Throttle Body All Fluids Royal Purple Future Mods JBA Head (in reply to texasbluedak) Post #: 13

RE: Badge removal - 8/14/2007 9:10:58 PM    JAB02LHS Posts: 129 Joined: 4/15/2007 From: CLEVELAND, OHIO Status: offline quote: ORIGINAL: texasbluedak Well the badge will get mother natures heat gun today since it will be 100 today with a heat index of 105. No need for the heat gun!! I am going to try and take it off this evening. Do it in the afternoon while the sun is still shining hard on it! Then fishing line will cut right thru the adhesive holding it in place. _____________________________ John A. Bakos '06 LARAMIE INFERNO RED--CC-HO--LSD--TOW--LEATHER ALPINE BOX --'08 TRX FENDER FLARES (in reply to texasbluedak) Post #: 14

RE: Badge removal - 8/15/2007 12:53:50 AM    4x4QC06V8DKTA   Posts: 446 Joined: 7/23/2007 From: Manassas, VA Status: offline very true! _____________________________ 5% Tint Autolite 3923 Spark Plugs Injen Cold Air Intake Flowmaster 40 Series (dumps in front of passenger tire) Stillen Cross Drilled Rotors W/ Ceramic Brake Pads Fastman 68.50 Throttle Body All Fluids Royal Purple Future Mods JBA Head (in reply to JAB02LHS) Post #: 15

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
SRT Forums
Race News

Dodge Prices

Dodge Trucks & SUVs
Ram Dakota
Durango Nitro

Dodge Cars
Avenger Intrepid
Caliber Magnum
Challenger Neon
Charger Stealth
Daytona Stratus
Dodge Viper

Featured Sponsors

Poll
Now that you've seen the 2008 Dodge Challenger SRT-8, what do you think?
	I Love It, Its Perfect
	I love the looks, but hate the transmission
	I like it, but I want the concept interior
	I like it, but I want the exact concept exterior
	Its ok, but the concept was far better
	Thanks, but I look forward to some changes on the 2009 models.
Poll Results Previous Polls

Top 10 Posters
dustyloins 21161 badstratrt 20848 midnight 17863 vipergts 14501 dodgegirl19 13072 ramfan5.9 12450 steve05ram36 11410 nickoman01 10864 drew 10116 casper 9606

New Vendors
Truxedo
Airaid
Mopar Biz
ATI ProCharger
Motor City Auto Parts
Sonic Electronix
Buy Auto Truck Accessories
Buy Car Floor Mats
Edge Products
AMSOIL - Performance Oil Technology