6inch lift for 4x4!! Chassis Tech.
Login  | |
|
6inch lift for 4x4!! Chassis Tech. - 8/10/2007 5:47:28 PM
|
|
|
flyboy1304
Posts: 254
Joined: 6/18/2007
Status: offline
|
I contacted Chassis Tech today and spoke with a few different Reps. and they told me that DO have a new lift for the 05-06 4x4 Dak!
It comes with control arms, brake lines, new struts, ect.t..... spindals, the kit is $2,590 and is a 6 inch lift.
I specifically asked if it WAS for the the 4x4 or the 4x2. they said they have a kit for each. how true this is i don't know, i will be visiting the chassis tech shop in like 6 months when i'm back from iraq to check out the kit and decide wether or not i'll buy it.
There shops phone number is (480) 898-9719. There shop is located in AZ. if you guys waht to inquire for yourselves, post up any info you guys can get. i don't think it is for a 4wd, because the rep told me it comes with new spindals, i'm not a true tech but the lift kit i installed on my S10 2wd was lifted with chassis Tech spindals (spindal lift). I thought that only 2wd can be lifted spindals.... Maybe one of you Tech guys can anwser this.... i don't know...
Thats all the info i got.... What do you guys think??
_____________________________
06' Dakota crew cab SLT
V8 4x4 crew cab tinted windows
Flowmaster exhaust. CAI, Billit Grill
Access tonneau cover
Whats next? Level kit, body lift, 33's,
|
|
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/10/2007 6:20:29 PM
|
|
|
flyboy1304
Posts: 254
Joined: 6/18/2007
Status: offline
|
btw Chassis Tech and AIM are the same company... i found that out today as well...
_____________________________
06' Dakota crew cab SLT
V8 4x4 crew cab tinted windows
Flowmaster exhaust. CAI, Billit Grill
Access tonneau cover
Whats next? Level kit, body lift, 33's,
|
|
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/10/2007 8:39:19 PM
|
|
|
superdak05
Posts: 2651
Joined: 3/12/2006
From: ct.
Status: offline
|
i am not fond of having a midsize truck lifted to the hilt. 6 might be ugly. but no one can tell until it is done.i kinds like the lowered sporty look. leave the lifts for the full size trucks.
_____________________________
thats right, i did it so what, cry two tears in a bucket, @#$% it, lets take it to the stage
13.7 / 101.3 in the 1/4 mile
|
|
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/11/2007 12:54:01 AM
|
|
|
jimboscomp
DF Lighting Specialist
Posts: 912
Joined: 11/20/2005
From: Woodland Hills, CA
Status: offline
|
as said in my Rednecks Culture speech in speech class, "the only way to go, is up"
_____________________________
Jimmy Clack
2005 Dakota QC Laramie V8 4x2
K&N 63 | Flowmaster 40 | DeeZee Bull Guard | 6x Hella 500 | CB Radio | Full LED Conversion | HID Headlights / Foglights
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/11/2007 5:11:34 AM
|
|
|
Dak_in_Black
Posts: 406
Joined: 9/30/2005
Status: offline
|
Eh, I see no point in slamming a perfectly good truck.
Several years ago in Miami I remember seeing big trucks like F-250s and Dodge 2500s duallys slammed down to the ground. I guess if all you are going to do is drive around then I reckon it doesn't matter.
I bought the truck because I needed it to haul stuff...
But I do agree that a full 6" may be a little much for these trucks, 3-4"s would be nice though.....but as superdak05 said, we won't know until someone does it...
_____________________________
++++++++++++++++++++++++++++++++++++
05 Dakota QC, Laramie, V-8, 4x4
Line-X
ARE Z Series Cap
K&N Aircharger 63-1546
Running AMSOIL for all fluids
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/11/2007 4:02:38 PM
|
|
|
flyboy1304
Posts: 254
Joined: 6/18/2007
Status: offline
|
i like sport trucks too but i not 4x4, i don't think i will be doing the 6inch lift any time soon i think it would be too hard to get car seats in and out of the truck! and for almost 3 grand before tires and rims, thats a little steep for me right now. the body lift and the level kit and new shocks! will be my choice for now alot easier on the Ol' wallet. and not too high for now...
_____________________________
06' Dakota crew cab SLT
V8 4x4 crew cab tinted windows
Flowmaster exhaust. CAI, Billit Grill
Access tonneau cover
Whats next? Level kit, body lift, 33's,
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/11/2007 9:04:44 PM
|
|
|
Altair
DodgeForum Moderator
Posts: 4639
Joined: 3/10/2007
Status: offline
|
I'm actually thinkin for my plans down the road my current height with the TM kit is pretty good. Gotta get some nice 20's on there, goin for a subtle street look that will still look good with the OEM wheels and 32" all terrains for the winter months (pretty much half the year around here)
_____________________________
quote:
ORIGINAL: batman13
i liked the first clinton,
he shot from below the belt.....
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/12/2007 5:30:59 PM
|
|
|
rookie
Posts: 317
Joined: 3/23/2007
Status: offline
|
up is the only way to go. that being said, 6" is a lot. I'd love to run 33s and push 300 hp.
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/17/2007 11:09:29 PM
|
|
|
02wrangler
Posts: 111
Joined: 9/9/2005
Status: offline
|
I'll believe it when I see a dak with the lift on
_____________________________
2005 Dodge Dakota, V8 4.7L, 6 speed manual, K&N Air filter, flow master 40 series exhaust, 2" trailmaster front leveling kit and 2" rear lift blocks, 265/75/16 BFG AT''s K&N FIPK
http://www.cardomain.com/ride/302
|
|
|
|
|
RE: 6inch lift for 4x4!! Chassis Tech. - 8/18/2007 2:17:46 PM
|
|
|
Bulldogbreed
Posts: 26
Joined: 7/14/2006
Status: offline
|
http://www.cardomain.com/ride/2115892
_____________________________
'05 white SLT CC 4x4 4.7
level kit, flowmaster dual out super40, K&N, airram's powerwire, more to come
|
|
|
|
|
Printable Version
