Need some basic help, new guy attempting stuff
Login  | |
|
Need some basic help, new guy attempting stuff - 10/13/2004 3:54:19 PM
|
|
|
ccdoggy
Posts: 7
Joined: 10/13/2004
Status: offline
|
so as a "bonding" experience i thought that me and my dad would do stuff to our all stock 2001 dakota with the 4.7L engine. I was thinking that we do a cold air intake and the tail lights. not much but why not. I have no experience but have a good memory and can figure things out easily.
Im wondering what kind of intake will fit on this engine, i have been looking at the kits on e-bay and the only ones for the 4.7 do not include the long tube just the filter, supporting things, and a connection to the existing intake tube. Is that really the only way it can be done on that engine and are the e-bay kits any good. Im not lookin to spend more then $60 on the intake. and must be moderatly easy to install.
and whats that blue stuff on what i think is the radiator fluid cap?
and i have seen some peopel that have taken off the black square that looks like the intake tube leads off from, is it just a covering and i can take it off and is there a tube to connect the intake to directly? like here: http://www.eautoworks.com/productimages/26847install.jpg
Final question: is it easy to remove and replace the rear tail lights?
lookin at something like this:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33716&item=7927746293&rd=1
Thanx allot for your help. i am currently at school an hour away from the truck and thats why all the weird questions, and i dont trust my dad with anything compplicated.
< Message edited by ccdoggy -- 10/13/2004 6:50:48 PM >
|
|
|
|
|
|
|
Printable Version
