a little help please

Printable Version

Dodge Forum >> Dodge Cars >> Dodge Daytona >> a little help please

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

a little help please - 7/17/2007 10:23:36 PM    kinglacey   Posts: 8 Joined: 7/17/2007 Status: offline alright i just got my first car, a 1990 dodge daytona ES with the 3.0 V6. shes finally running good and i was looking to add a little horse power and have seen some stuff online about replacing the air box with the k & n cone filter from a 5 liter mustang and was wondering if anyone knows if this really helps and if it does how would i go about doing the swap. if anyone can help that would be great.                           thanks Post #: 1

RE: a little help please - 7/17/2007 10:50:54 PM    bmxerkev   Posts: 27 Joined: 7/17/2007 Status: offline well im not to sure about that mustang filter thing but i have the same car and before i made a custom air intake pipe i just put the cone filter at the end of the stock (rubber) pipe and just took the air box out .. some people call it ram air because it isnt gettin mych cold air but it works untell u get a diff pipe (in reply to kinglacey) Post #: 2

RE: a little help please - 7/18/2007 7:27:43 AM    kinglacey   Posts: 8 Joined: 7/17/2007 Status: offline alright i see what your saying thank you. now when i take off the air box what should i do about the hose connected to the crank case vent? do i just plug it or let it hang or is the something special i need to do?       thanks for the help < Message edited by kinglacey -- 7/18/2007 7:30:58 AM > (in reply to kinglacey) Post #: 3

RE: a little help please - 7/18/2007 7:39:46 AM    bmxerkev   Posts: 27 Joined: 7/17/2007 Status: offline well for that i just have it plugged .. ya  it makes your check engin light come on but thats not a big deal... for my stom pipe i got made it takes the place of even the air scoop right beside your batt and goes down to the hole (vent) in front bumper ...and in my eyes a daytona is to good to have something from a mustang in it ... but try that and see how you like it ..... good luck  (in reply to kinglacey) Post #: 4

RE: a little help please - 7/18/2007 7:45:26 AM    bmxerkev   Posts: 27 Joined: 7/17/2007 Status: offline oops sorry i ld u i have it plugged .. i do but it has a little filter plugged on the end of that hose..ill try and fnd my dig cam and take a pic to post here .... good luck (in reply to bmxerkev) Post #: 5

RE: a little help please - 7/18/2007 8:01:59 AM    kinglacey   Posts: 8 Joined: 7/17/2007 Status: offline if you could get a pic that would be great. oh and where would i look to find a filter like that or do i have to make it some how? thank you so much you've been awesome (in reply to kinglacey) Post #: 6

RE: a little help please - 7/18/2007 8:45:12 AM    bmxerkev   Posts: 27 Joined: 7/17/2007 Status: offline um well i got mine through a friend ...but if u have like part source or sumthin of the sort out there im sure they will be able to order one.. and yes when i get home from work ill find my cam and take a pic for you  (in reply to kinglacey) Post #: 7

RE: a little help please - 7/18/2007 9:08:03 AM    kinglacey   Posts: 8 Joined: 7/17/2007 Status: offline alright i'll start lookin thank you again for all the help (in reply to bmxerkev) Post #: 8

RE: a little help please - 7/18/2007 9:33:42 AM    bmxerkev   Posts: 27 Joined: 7/17/2007 Status: offline not a problem... ill work on gettein that pic for you to so keep in touch (in reply to kinglacey) Post #: 9

RE: a little help please - 7/18/2007 11:37:30 AM    kinglacey   Posts: 8 Joined: 7/17/2007 Status: offline so do you know of any other cheap ways to help out this engine (in reply to bmxerkev) Post #: 10

RE: a little help please - 7/18/2007 11:56:00 AM    bmxerkev   Posts: 27 Joined: 7/17/2007 Status: offline i know of a couple actualy . but its up to u if u eally wanna do them....efore i had a good engh job to buy things for it  just tweeked it ou in ways that u ally shouldent but it worked and didnt mess noth up at all (in reply to kinglacey) Post #: 11

RE: a little help please - 7/18/2007 11:57:28 AM    bmxerkev   Posts: 27 Joined: 7/17/2007 Status: offline and im sorry about the ypin errors ...my key board just sux  keys dont work some times (in reply to bmxerkev) Post #: 12

RE: a little help please - 7/18/2007 12:24:38 PM    kinglacey   Posts: 8 Joined: 7/17/2007 Status: offline lol tis fine but yah if they're cheap enough i might try them out, what you got in mind? (in reply to bmxerkev) Post #: 13

RE: a little help please - 7/18/2007 6:06:54 PM    kinglacey   Posts: 8 Joined: 7/17/2007 Status: offline so would it be called a crank case vent filter? i have no idea what to call it (in reply to kinglacey) Post #: 14

RE: a little help please - 7/19/2007 1:11:33 AM    jmc98   Posts: 3 Joined: 7/8/2007 Status: offline ive been interested in adding some horse to my 3.0 too, i gotta see a pic of this ram air lol it sux when u dont have enough $$$ to do anything really special but lil tweaks so i need some ideas (in reply to kinglacey) Post #: 15

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
SRT Forums
Race News

Dodge Prices

Dodge Trucks & SUVs
Ram Dakota
Durango Nitro

Dodge Cars
Avenger Intrepid
Caliber Magnum
Challenger Neon
Charger Stealth
Daytona Stratus
Dodge Viper

Featured Sponsors

Poll
Now that you've seen the 2008 Dodge Challenger SRT-8, what do you think?
	I Love It, Its Perfect
	I love the looks, but hate the transmission
	I like it, but I want the concept interior
	I like it, but I want the exact concept exterior
	Its ok, but the concept was far better
	Thanks, but I look forward to some changes on the 2009 models.
Poll Results Previous Polls

Top 10 Posters
dustyloins 21166 badstratrt 20851 midnight 17869 vipergts 14501 dodgegirl19 13072 ramfan5.9 12450 steve05ram36 11412 nickoman01 10864 drew 10116 casper 9606

New Vendors
Truxedo
Airaid
Mopar Biz
ATI ProCharger
Motor City Auto Parts
Sonic Electronix
Buy Auto Truck Accessories
Buy Car Floor Mats
Edge Products
AMSOIL - Performance Oil Technology