01 Intrepid ES - P0340 Camshaft Position Sensor Circuit Malfunction
Login  | |
|
01 Intrepid ES - P0340 Camshaft Position Sensor Circuit... - 7/11/2007 9:32:02 PM
|
|
|
lecnt
Posts: 2
Joined: 7/11/2007
Status: offline
|
I have a problem with my 2001 Intrepid ES. This morning on my way to work the engine died at a red light. When I restarted, the engine light came on and has been on since. I haven't been noticing anything different since then other than that it's harder to start it. I bought a car reader and got P0340 as the error code which means "Camshaft Position Sensor Circuit Malfunction." Anybody has any ideas as to what to check? Is it something I can fix or do I have to take it to the dealership?
I appreciate any advice.
George
|
|
|
|
|
|
|
|
RE: 01 Intrepid ES - P0340 Camshaft Position Sensor Cir... - 7/12/2007 5:09:31 PM
|
|
|
Dodge Tech
Posts: 566
Joined: 12/20/2006
Status: offline
|
no not the same the ones in that post are for 3.2 and 3.5 engines u would have a new 3.5 or 2.7 the cam sensor in up front above the belt, driver side. 1 10mm bolt and one plug, put it in ,dont unplug the batt, drive the car 3 to 5 days so the computer will see good trips. if it is fixed the PCM will turn off the check engine light for u and u know with 100% that its fixed.
_____________________________
Work at a Chrysler,Dodge,Jeep Dealer<Master AC/Electrical/Engine Performance
Chrysler Dodge Jeep Tech for 11 plus years and do side work in ATLANTA if u need something done just email me.
http://home.comcast.net/~kkeller608/index.html
|
|
|
|
|
Printable Version
