Hey Guys,

I did a little subwoofer installation over the past couple days. Just wanted a little thump in the truck and after some careful measuring, I got it figured out.

The box doesn't have a huge amount of air space.. Kinda scared me in the beginning but I got a couple low powered subs and it worked out nicely.

Not sure if anybody has any better idea's.. if so post.The box that Imade may have put me out $50.

[IMG]local://upfiles/54951/511C1E13D96A49C68E340614F790E88F.jpg[/IMG]

__________________
2002 Dodge Dakota Sport 3.9L 2WD
Water Pump
Aftermarket Tail Lights

very nice, beats the $250 for the whole unit that goes under the seats

__________________
01 dakota- 3.9l V6, 4 speed auto 4x4 ext. cab

looks good. I've been looking into buiding a custom box for mine to fit two 12's right now they are just sitting on the back seat. and Mtx ones are too expensive and you can only fit 10's in them anyways.

__________________
05 dodge ram daytona RCSB 4x4 hemi #5212
99 dakota 4x4 318 - sold
88 dakota 2wd 3.9
90 dakota 2wd 3.9 rcsb 5speed
93 jeep grand cherokee 4x4

so did you cut out the space out of the tool tray and build an enclosure into this? or did you cut out and build a fiberglass frame? I'm working on building a box, but since its smaller than the tool tray you can see the sides( I don't like the gaps) so i'm cutting off the cup holders from the tray and attaching them to my MDF/fiberglass box.we'll see how it works

__________________
99 Dodge Dakota Ext 3.9, 4WD
Rancho shocks, K&N filter, Holley throttle body
Ecilpse 600 watt Amp, Bazooka Subs, DB Digital Capacitor, Monster wire, Borla Exhaust System, Magnaflow catalytic converter, Royal Purple fluids

Very clean looking install. I have 2 15's in a 7cu/ft box. I had to take out the seats and the box sits on top of the tool tray and its anchored to the floor.

__________________
97 Dakota Ex-cab
AirRaid CAI
R/T rims
5.2l 318
180 thermo
limo tint

you should do up a small how-to

__________________
Zigg

2008 Dodge Ram 1500 ST
Straight Piped
Body Lift
35 x 12.5 x 17 on stock rims
Debaged
Night Shaded Tails and 3rd Brake Light

I cut out the tool tray..I didn't want to in the beginning but I had to. There's very little space to work with back there.. My main concern when I started was to make it look like there was nothing in the truck... It worked out pretty good..

ZiggyNeon, uhm... get a sheet of MDF and start cutting I took the whole plastic tray under the seats out and cut out the tool tray part and then used that more or less to go by in making the shape for the box.

__________________
2002 Dodge Dakota Sport 3.9L 2WD
Water Pump
Aftermarket Tail Lights