it is very easy. there are 12 bolts holding the fender on the truck. there are five behind the headlight(three by the horns and two just below the horns under the fender). then there are two behind the control box by the intake. there are two behind the inner fender liner. one at the bottom of the fener next to the door. on at the top of the fender by the door. and three at the upper front of the fender. make sure to disconnect the ground wires as well as the windshield washer tank. the intake system is also bolted to the fender. i just did a right 3/4 nose on my '99 r/t. if you have any other questions just email me at
mattyrz@aol.com. </P>
</P>