I purchased a k&n aircharger yesterday and I have some questions.

1. on what bolt do I mount the bracket that holds the intake tube.

2. there is a sensor that I unplugged from the stock resonator that has nowhere to go on the new intake, what becomes of that?

3. The crankcase ventilation tube is different than on the pic in the instructions, and can i separate the long piece from the tee or will it break?

Thank you for your answers!!!

crankcase tube stock, Can it be separated?

local://upfiles/6807/8D190FD5973749EBA1B4F21247489385.jpg

was this part designed for your exact model vehicle? did it come with instructions (real men don't EVER read instruction, do we)?

heres a pic of the instructions that came with the kit. http://www.kandn.com/instructions/63-1092.pdf

Do not mess with the sensor.

What is this word "instructions"..i've never heard of it!!!!!!

ha ha !!



ok all installed exept for air temp sensor , (at least thats what I think it is)

why what will it do ?

what? no one interested ? what should i do with the air temp sensor?
Is there a way to re route it, should i tap a hole in the air tube of the k and n?\
Come on guys!!!

[:@] no techs have any ideas?

.

i have a 03 like yours ,are you sure your air temp sensor is located in the air hat on top of the engine? mine is located on the drivers side front of the intake manifold,i "ve got a auto trans in mine. that sensor has to be hooked up i d call k&n and ask what there fix is ,had a cai installed on mine ,put the air temp sensor in the air pipe tube ,gas mileage went all to hell,didnt notice much more power either ,went back to the stock configeration ,just dropped in a k&n filter to replace the stock air filter.looked at the instruction file you have posted up there & they recommend you drilling a hole in the air pipe for your air temp sensor. id leave it in the intake manifold if thats where its at now .