On an 88 Dakota V6,2d automatic where's the fusible link for the RED constant 12volt wire that goes to the ASD-(automatic shutdown) relay terminal 30? I've repared a break in the Blue-Yellow wire that goes from terminal 85 of the ASD to the computer but truck will only run while I have a jumper wire from +(positive) post of battery to backside of terminal 30. I don't get any voltage reading at terminal 30 without the jumper wire. I also don't get any continuity reading between terminal 30 and the + battery cable, while cable is off battery. Can that fusible link be repared,replaced or bypassed? Thanks for any help.

fuseable links are hard to find if you dont know wireing that good. they kinda look like this -----=====----- it should be heat shrinked. it should be somewhere on the drivers side inner fender.

but you can either buy a fuseable link, or replace it with a fuse.

__________________
05 dodge ram daytona RCSB 4x4 hemi #5212
99 dakota 4x4 318 - sold
88 dakota 2wd 3.9
90 dakota 2wd 3.9 rcsb 5speed
93 jeep grand cherokee 4x4

This is from the 1989 service manual:
http://www.dodgeforum.com/upfiles/27...3EA83985EA.jpg
Regards,
Greg