DodgeForum.com
DodgeForum.com Home - Dodge Marketplace - Dodge Photo Galleries - Create an Account
Dodge News - Dodge Recalls & TSBs

Go Back   DodgeForum.com > Dodge Cars > Dodge Daytona




Reply
 
Thread Tools
  #1  
Old 11-20-2006, 10:08 PM
1989daytona 1989daytona is offline
Rookie
 
Join Date: Aug 2006
Location:
Posts: 97
Default NEED HELP PLEASE

Hello,
this is the situation I have a 1989 2.2 turbo 1 and I have had it for over 2 years and have not got it running right once. Heres the symptoms when 1.its cold it starts fine but when it warm it revs up real high. 2. It misses out real bad at lower rpms and at certain spots in certain rpm rangs like around 2,000 but if you stomp on it, it evens out. 3. And a couple of times while I am driving it seem like the fuel just cuts out because it just falls onits face for lik 3 sec then it just runs through it. and it throws a code. I took it to autozone to check it and they said map sensor but that didnt do a thing. So any info at all would b greatly appreciated.
Thanks Dave
Reply With Quote
Sponsored Links
This ad is not displayed to registered members.
Register your free account today and become a member on Dodge Forums!
  #2  
Old 11-20-2006, 11:56 PM
damageincracing damageincracing is offline
Professional
 
Join Date: Nov 2005
Location:
Posts: 187
Default RE: NEED HELP PLEASE

Check your vacuum lines and make sure they are in the right places. Also check for vacuum leaks. My buddies 88 Shelby had the same issues and we found that the vacuum lines were all screwed up.
Reply With Quote
  #3  
Old 11-21-2006, 02:00 AM
1989daytona 1989daytona is offline
Rookie
 
Join Date: Aug 2006
Location:
Posts: 97
Default RE: NEED HELP PLEASE

When we got the car all the vacuum lines were jacked up and there is no vacuum guide on the underside of the hood. And the locall junkyards dont have any. And me and my father have tried our best to get them right but to no prevail. So mayb if you have a diagram or know where I can get one from that would great.
Thanks Dave
Reply With Quote
  #4  
Old 11-21-2006, 03:20 AM
89Daytona 89Daytona is offline
Veteran
 
Join Date: Dec 2005
Location:
Posts: 317
Default RE: NEED HELP PLEASE

http://www.autozone.com/servlet/UiBr...3d800d5c84.jsp

Take your pick....

Vacuum hose routing-1989 2.2L and 2.5L Canadian, Federal and Altitude EFI engines
http://www.autozone.com/images/cds/g...3d800d5ca7.gif

Vacuum hose routing-1989 2.2L and 2.5L California EFI engines
http://www.autozone.com/images/cds/g...3d800d5ca8.gif

Vacuum hose routing-1989 2.2L Canadian, Federal and Altitude Turbo I engine
http://www.autozone.com/images/cds/g...3d800d5ca9.gif

Vacuum hose routing-1989 2.5L California Turbo I engine
http://www.autozone.com/images/cds/g...3d800d5caa.gif

Vacuum hose routing-1988-89 2.5L Premier engine
http://www.autozone.com/images/cds/g...3d800d5ca5.gif

Vacuum hose routing-1988-89 2.2L Turbo II engine
http://www.autozone.com/images/cds/g...3d800d5ca3.gif
Reply With Quote
  #5  
Old 11-21-2006, 03:36 AM
1989daytona 1989daytona is offline
Rookie
 
Join Date: Aug 2006
Location:
Posts: 97
Default RE: NEED HELP PLEASE

Thank you for the info I will check them out
dave
Reply With Quote
  #6  
Old 11-25-2006, 09:56 AM
vicco27 vicco27 is offline
 
Join Date: Nov 2006
Location:
Posts: 29
Default RE: NEED HELP PLEASE

After getting your vacum lines straightened out, if you are still having problems remove the EGR valve and clean it of carbon buildup buy soaking it in a solvent type cleaner overnight, (Don't submerge the diaphram part of the valve) and then use a small knife blade? (Carefully)brushes etc to clean the inside passages of the valve. After cleaning use a vacum source to see if the valve is working. I hope this helps.[sm=icon_cheers.gif]

Vic vicco27.......Keep Rollin!

__________________
Paladin......Have Daytona, Will Travel!......Victor H. Cook
Reply With Quote
  #7  
Old 11-25-2006, 01:04 PM
89Daytona 89Daytona is offline
Veteran
 
Join Date: Dec 2005
Location:
Posts: 317
Default RE: NEED HELP PLEASE

Seeing as the problem only occurs when the vehicle is warmed up it could be a faulty Oxygen sensor.
Reply With Quote
  #8  
Old 11-25-2006, 06:04 PM
1989daytona 1989daytona is offline
Rookie
 
Join Date: Aug 2006
Location:
Posts: 97
Default RE: NEED HELP PLEASE

OK we got the vacuum lines fixed and changed the tps sensor and it runs fine except when I get to around 11 pounds and then it kinda bogs down again but for it seems to be running good for everything under 11. And for the egr valve we do not have one on the car. And we put a new o2 sensor in the car about 1 month ago. Thanks So much for all your the help.
Dave
Reply With Quote
  #9  
Old 11-26-2006, 10:13 AM
vicco27 vicco27 is offline
 
Join Date: Nov 2006
Location:
Posts: 29
Default RE: NEED HELP PLEASE

I think if you are getting more than 11 Lbs of boost something is wrong, I thought 7-9 Lbs was stock and 9-11 Lbs For the Off road computer, also the cat could be getting plugged up, are you showing anything on your Power Limeted read out now. Our 84 T Z has an EGR didn't know the newer ones don't.[sm=icon_cheers.gif]


Vic vicco27.......Keep Rollin!

__________________
Paladin......Have Daytona, Will Travel!......Victor H. Cook
Reply With Quote
  #10  
Old 11-26-2006, 01:29 PM
89Daytona 89Daytona is offline
Veteran
 
Join Date: Dec 2005
Location:
Posts: 317
Default RE: NEED HELP PLEASE


Quote:
ORIGINAL: vicco27
Our 84 T Z has an EGR didn't know the newer ones don't.
The newer Cali emission cars have them (atleast according to the diagrams autozone has on their website)
Reply With Quote
Reply



Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors










New Sponsors
All times are GMT -4. The time now is 04:15 AM.

© Internet Brands, Inc.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.