I just put LED light bulbs in for the
brake lights/turning flash
the problem is that the 4 ways flasher work normal
but the turn signal flasher is very fast. if you turn
the IGN off then on it will flash normal for about 6 flashes
then goes into fast mode any way to fix this.

__________________
~Hammer Down~

You need 2 3-ohm equalizers, one on each side, mounted either front or rear.
It requires a load resistor to avoid the fast flash rate that happens when the current draw is too low. (LED's draw a lot less current than stock bulbs.)

__________________
Mango #389 in TX

Mods: Diablo Predator/DIY Caliper Paint/DIY Intake/RAMAir Hood/Dynatech-LTs/Hotchkis Sways/KWv2/Corsa/Hood Pins/KRC 212 LX cam/Zex