Has anyone put a set of JBA shorty's on their Charger yet, if so how did they fit and was there any mods needed?

Thanks for any info, Orv

i was told that these headers are tight fit and they hit the side of frame under hard acceleration.
i guess are will hear a clunk.
also these are just as good as whats stock on the daytonas.



go mango 1342
mopar cai
mopar long tube headers (not installed yet but sitting in garage)

73 charger se
475 hp
355 gears
mustang killer

I helped a friend put JBAs on his Magie R/T which in that respect is no different from the Charger. There were no issues w/the fit, once installed the headers don't come in contact w/anything. They bolt right up to the stock CAT-midpipe. We also installed high flow CATs at the same time <= not a required mod.

No other mods are needed to install the headers.

My friend couldn't be happier with the performance gains.

[sm=icon_rock.gif]

__________________
Mango #389 in TX

Mods: Diablo Predator/DIY Caliper Paint/DIY Intake/RAMAir Hood/Dynatech-LTs/Hotchkis Sways/KWv2/Corsa/Hood Pins/KRC 212 LX cam/Zex

Thanks Mango, i'll let you know how it goes when i get them.

hi i just picked up a complete set headers midpipes and exaust havent installed them yet but i have been told its a straight bolt on ,but i will recommend you get them coated either silver ceramic or titanium ,just my opinion .if you find a cheap set i believe there is a guy on ebay selling them for 199 ,you can ship them out to a company in california called enginered application they coated my heads inside and out for 250 150 for outside and 100 for the inside a major difference in look and performance and you save your seld a couple of hundred dollars .

__________________
>JBA HEADER>JBA HIFLOW CAT>JBA CATBACK DIABLO CMRTUNE>MOPAR HEADS>BLOWER CAM>MSD COIL PACKS>MSD BOOSTER PUMP>METH KIT>GS SUPERCHARGER>8.5 LB BOOST>SRT HOOD>SRT WHEELS>SRT BREMBO BRAKES>SRT SUSPENSION>6.1 INTAKE>EGR DELETE MOD>HD OIL ENGINE COOLER>HD TRANNY COOLER,QUAFIEE DIFF,1000HP AXLES,RAZOR BRACES.

Thansk for the info top, i got mine from http://www.autoanything.com/exhausts...roductInfoTabs for 445 with free shipping ceramic coated. Everybody check this place out, lots of stuff and good prices.

Will those jba headers bolt right on to a charger with the stock exhaust system?

__________________
I don't hate cops just speed limits!

hey, i never said they should not bolt no .
all i siad is that i herd that yea hit the side of the frame when you hit the gas [sm=badidea.gif]
what you do is up to you .
just trying to help.


go mango 1342
well you know the rest[sm=bling.gif]

According to mangointx he said they bolt right on no problem , i'll let you know when i put them on.

Thank you. Looking to be getting a 06 charger in a week or 2 and thinking of adding jba exhaust and headers by October, November.

__________________
I don't hate cops just speed limits!