DodgeForum.com

DodgeForum.com (http://dodgeforum.com/forum/index.php)
-   1st Gen Durango (http://dodgeforum.com/forum/forumdisplay.php?f=69)
-   -   Part Numbers for 5.9 Performance Ignition (http://dodgeforum.com/forum/showthread.php?t=58111)

hydrashocker 05-07-2006 06:51 PM

Part Numbers for 5.9 Performance Ignition
 
Ok I got the part numbers for the performance Ignition I put on my truck.

MSD 8.5mm Wires #32189
MSD Blaster Coil #8228
Accel Distributor Cap #120329
Accel Distributor Rotor #130328
Accel OEM Adapter to Coil #140021AH

I had to use some Accel parts because MSD and Mallory don't make them yet.

The truck starts and runs like a champ! Im going to try to gap the Champion Truck Plugs .005 more to handle the new spark without fouling. I will post the results later. These are OEM replacement parts and will bolt up to OEM perfectly.

hydrashocker 06-02-2007 04:15 PM

RE: Part Numbers for 5.9 Performance Ignition
 
Gap has been great when using the Champion Truck Plugs. I accually when down to .044 as it seems to run better.

cesspool 06-06-2007 01:15 AM

RE: Part Numbers for 5.9 Performance Ignition
 
I installed all this tonight. I can tell a difference. Will this help with Gas mileage?

hydrashocker 04-22-2008 01:54 PM

RE: Part Numbers for 5.9 Performance Ignition
 
Power and gas mileage should increase if you can keep your foot out of it.

The last plugs I installed were gapped at .041/.042 and they run smooth.


All times are GMT -4. The time now is 01:45 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.