Pics Added!!!!! Check it out! The pics are from the stripe application on Vaughn's ride. Thanks Vaughn. More pictures are farther down in the thread.

TOOLS
1) Spray bottle
2) Masking tape
3) Squeegee (credit cards work too)
4) Bucket
5) Liquid Dish Soap or Decal application liquid
6) Patientence!!!

PREP WORK
1) Wash and Wax your car!!!
2) Place car into shaded area. Perferably a covered garage with enough light to work with.
3) Using masking tape, tape boundary of area you want to place decal. For straight decals, just tape the lower boundary.
4) Adjust the tape till you like the line.
5) Mix a small amount (1-2 tbsp)of dish soap in a bucket of water.
6) Fill a spray bottle with the soapy water.

APPLICATION
1) Cut the decal into door sized pieces. Smaller pieces are easier to work with!
2) Spray the section of the car you are putting the decal with the soapy water liberally.
3) Peel the wax paper of the decal section slowly off.
4) Spray the decal liberally.
5) Spray car with soapy water if needed again.
6) Place decal on car and manuver it to where you want it.
7) Squeegee the decal with the paper backing still on.
8) Slowly peel back the backing squeegeeing where needed.
9) Squeegee any remaing bubbles out of decal.
10) If small bubble still exist, using a small pin, pop the bubble and squeegee the fluid out.
11) Repeat process for rest of car.
12) Remove masking tape.

The process takes time, but the savings will be worth it in the end!!!

Pic 1 - before
Pic 2 - stripe taped up
Pic 3 - tic marks...help guide you along
Pic 4 - first section cut out, notice the remaining stripe is still up
Pic 5 - first section applied

[IMG]local://upfiles/26771/78254F81E095413CADA7E157DF2BB006.jpg[/IMG]

[IMG]local://upfiles/26771/8AE373FBCB5148B09E1B5F689CEA0265.jpg[/IMG]

[IMG]local://upfiles/26771/625F2313CD05465B968D7F5D3C347827.jpg[/IMG]

[IMG]local://upfiles/26771/1E4A692F6F3A41CAB556FF0E61669CFA.jpg[/IMG]

[IMG]local://upfiles/26771/6C3095E9E760428694B3771A3722CE79.jpg[/IMG]

More pictures further down.

__________________

those are the stripes i want on my white srt-4. what color do you think i should get and do you think it would look good?

__________________
Sunburst Orange SRT-4 and always down for a race.

Either gloss or flat black stripes should be good on a white SRT.

__________________

Those are some good looking stripes!!!

That stripe helped a lot in me getting 1st place at the Louisiana Nats...a big thanks to you all at Revolution!!!

BTW, I'll be ordering another one from you soon. My driver's side just got hit by a bike!

You can read about the incident here.
http://www.dodgeforum.com/m_449315/tm.htm

__________________

Nice work...looking good....now wanna drive up to ND and re-do mine???[8D]

__________________

2004 Dodge Ram QC LARAMIE 4x4
HEMI
Lots of chrome

2006 Honda Aero 750-no mods needed
1995 Polaris Xplorer 400 4x4-2 stroke, not stock, unstoppable

If I ever get stationed at Minot I'll look you up.

__________________

HA HA HA 10-4

__________________

2004 Dodge Ram QC LARAMIE 4x4
HEMI
Lots of chrome

2006 Honda Aero 750-no mods needed
1995 Polaris Xplorer 400 4x4-2 stroke, not stock, unstoppable

Good instructions, dude.......!!!

Dusty

__________________
2004 SRT-4 w/Stage 1, M/B Exhaust, BOV, 3-D Taillights, MPx Front STB, $22.97 OCC, K&N Filters. Dodge Forum's FIRST Car of the Month!!!!

my graphics

[IMG]local://upfiles/30925/15B109799EB94E2DB0C52A4E4A7B73A7.jpg[/IMG]

__________________
I NAMED HER HERMIE...SHORT FOR HERMAPHRODITE, BECAUSE SHE HAS BALLS!!!
<a href="http://www.myspace.com/t_frizz">CHECK OUT MY MYSPACE AND ADD ME AS A FRIENDa>