Falling off the track

Printable Version

Dodge Forum >> Dodge Cars >> Dodge Intrepid >> 1st Gen Intrepid >> Falling off the track

Page: [1]

Login Message << Older Topic   Newer Topic >>

Falling off the track - 5/29/2004 1:25:06 PM    pause Posts: 14 Joined: 2/11/2004 Status: offline Hey all! I'm going to be re-tinting my 96 intrepid, but this time I would like to make the job a lot a bit easier by taking the windows off the tracks so i can just set them on a table and apply the tint. Are the door panels don't seem to be too much of a pain to get off, but I was curious if anyone has any hints or tips on how to get the windows off the door! Post #: 1

RE: Falling off the track - 5/31/2004 12:57:30 AM    71RoadRunner Posts: 9542 Joined: 7/28/2003 From: United States Status: offline There should be access holes in the door after you remove the door panel. You may have to have the window part way up or down to align the holes with the bolts that attach the window to the bracket. There will probably be only 2 bolts and a few soft washers that go betwwen the glass and the metal bracket that it bolts to. It should be fairly easy. The hard part is retrieving the washers after they fall into the door. _____________________________ 71 Plymouth Roadrunner 440 Auto. Modified 04 Dodge SRT-4 2.4L DOHC Turbo Intercooled 5-spd. Modified (in reply to pause) Post #: 2

RE: Falling off the track - 5/31/2004 5:15:18 PM    pause Posts: 14 Joined: 2/11/2004 Status: offline Very true (losing parts in the door). We tried tinting the car w/o taking off the windows, and as a result there's probably 2 or 3 razorblades in each door now. Doh! (in reply to 71RoadRunner) Post #: 3

RE: Falling off the track - 6/2/2004 1:00:15 AM    dodgemech   Posts: 788 Joined: 2/22/2004 Status: offline pull the speaker grill and there are 4 screws inside there-3 screws along the bottom of the panel, one in the door pull, one in the handle recess, one in the R/S corner(with the door open). I also take off the the little sattelite speaker if you have them or the block offs if not(sit on top of the R/S of panel). Then LIFT UP on the panel, there are little clips that it slides down into when it attaches. All in all probably 3-5 minutes-no tricks. Then you can loosen the 2 nuts that hold the window to the track and pull the whole window out. (in reply to pause) Post #: 4

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
SRT Forums
Race News

Dodge Prices

Dodge Trucks & SUVs
Ram Dakota
Durango Nitro

Dodge Cars
Avenger Intrepid
Caliber Magnum
Challenger Neon
Charger Stealth
Daytona Stratus
Dodge Viper

Featured Sponsors

Poll
Now that you've seen the 2008 Dodge Challenger SRT-8, what do you think?
	I Love It, Its Perfect
	I love the looks, but hate the transmission
	I like it, but I want the concept interior
	I like it, but I want the exact concept exterior
	Its ok, but the concept was far better
	Thanks, but I look forward to some changes on the 2009 models.
Poll Results Previous Polls

Top 10 Posters
dustyloins 21040 badstratrt 20755 midnight 17495 vipergts 14475 dodgegirl19 13072 ramfan5.9 12435 steve05ram36 11346 nickoman01 10864 drew 10116 casper 9606

New Vendors
Truxedo
Airaid
Mopar Biz
ATI ProCharger
Motor City Auto Parts
Sonic Electronix
Buy Auto Truck Accessories
Buy Car Floor Mats
Edge Products
AMSOIL - Performance Oil Technology