lets start a list for everyone. list what you have or find and whether its a 1st gen or 2ng gen and what motor.

__________________

I have a 98 Plymouth Breeze, 2.4L. With CAI, custom made 2.5inch CAT back exhaust, and Titanium tip sport muffler. I also have 17inch Primax Silver Powder coated aluminum wheels, and low profile tires. I have installed the Eibach pro kit, which lowers it 1.5inches. I have an APR wing, with carbon fiber ends, and cross drilled and slotted performance brake rotors. I will post a pic as soon as I can.

Ok here it is!

[IMG]local://upfiles/19918/C9BB2475B7F440B4B90575C36C115BBF.jpg[/IMG]

Ok, I got a 95 SOHC 2.0L (5spd), with:

short thow shifter
cold air intake with K&N cone filter
Pacesetter header (ceramic coated) followed by custom 2.5" exhaust with hight flow cat and muffler
MSD coil and wires
55mm bored out Throttle Body with half shaft mod (57mm)
AFX underdrive pulley

__________________
1995 Stratus 2.0L 5spd
CAI - w.K&N filter
2.5" exhaust
Magnaflow Cat/Muffler
MSD Coil and Wires
55mm throttle body
AFX underdrive pully
Short Throw Shifter
Canuck Lowering Springs 1.6"
Garrett T3 turbo w/7psi boost

i have a 98 strat 2.4 DOHC 16 valve right now i dont have anything done motor wise but this summer i got some 17 inch egale alloys with low pro ZRi's , first i hooked up the system with a costom alpine cd player and an XM radio 2 10 inch pioneers 750 watts a pieace and a 500 watt kicker amp bout ive only had it 4 about 7 months im stil in the works im not sure what i want 2 do next. got any suggestions???

Lookin' for ideas I'm thinking of squeezing a lil' more from the car to start I have 04' dodge stratus sxt 2.7 litre V6 3 speed auto trans. Looking for ideas on intake K & N makes a stock replacment however I haven't seen any true cold air intakers. Also lookin' to do cat back found everything for the coupe which is not a dodge motor mitsu makes the motor. also lowering preformance springs once again also for the coupe. any know of any good parts. One more thing chips for the ecm or a performance flash any takers on that. I've poken to a couple of master dodge techs and they say that there ain't much out there for the sedan. Help want more from this car looks good just want some good add ons!!!!!

In the process of doing up my ride. 2004 SE Sedan w/ 2.7L V6

Here is what I have already or I am waiting to arrive and/or put on:

Crystal Headlight Assembly (found on ebay) w/ SilverStar Headlights and Sylvania clear corner bulbs.
Weapon-R Secret Weapon Cold Air Intake
18" Riax Zuku Wheels w/ 225/45/18 Toyo Proxies (found at rim1.com)
Roku Creations Muffler 2.5" inlet/2.5" outlet (found on ebay). Not installed.
Canuck Motorsports Lowering Springs (found on ebay) 1.6" drop front/rear. Not Installed
Areo Designs Body Kit (found on ebay). Not in possesion yet.
(Heard this Body Kit might not fit from other posts on this site, but roommate works w/ fiber glass and will modify for me.)

JVC Cheap Head unit from Wal-Mart
2 10" Infinity Basslink X preamped subs. Great interion sound, won't rock street.

If you want to check my ride, my album has pictures with rims. More pictures to follow.

Thanks NowADodgeMan I like the headlights those give a great look I don't know if the lowering kit that you used would do me any good you have an SE model with basic suspension to start I have an SXT with sport suspension which already sits approx. 1/2 shorter than basic models

Thanks for the compliment. According to the salesman I bought the car from (my Uncle Pat) all 4 door models have the same rear suspension. It doesn't matter if you have an ES, SE, SXT, or R/T, as long as it has 4 doors it has a Chrysler suspension. The 2 door coupe has a Mitsubishi suspension.

Anyway, that's what I was told. If you're interested in the same kit, contact Canuck Motorsports at canuckmotorsports.com, go to order and there is an email link for questions.

Was going to post...never mind [&o]