Hi Everybody,

This is my first post on here...I own a 2001 Intrepid R/T. I was performing a coolant flush and fill yesterday on the car. I twisted the drain plug open and I could not twist it back to a shut position, because it just keeps turning. I'm wondering if any of You have had a problem with this? I've done this service before so I'm surprised I've run into trouble. I'll purchase a new plug later on today and try to install it. My only worry is that I've actually damaged the rad plug area itself.

__________________
1993 Chrysler Intrepid ES 3.5L V6 in Ferrari Red @ 194 miles
1998 Ford Contour GL Sport 2.5 V6 5speed in Jet Black @ 164 miles
2001 Chrysler Intrepid R/T 3.5L V6 in Bullet Silver @ 45 miles
2003 Chevrolet Cavalier 2.0 Ecotec in Jet Black @ 27 miles

The PLUG is a plug NOT a screw...(in my shadow. But it should be the same)
It has a hole through it in the middle, Turn it it half way and it will stop
leaking.Otherwise it will turn forever.
Sorry for the late reply if it is fixed already

__________________
A ford and a Chevy drive off a cliff, which one hits the ground first?

Who cares.

Yeah it was fixed a while ago. The drain plug was actually stripped...so it kept twistin.

__________________
1993 Chrysler Intrepid ES 3.5L V6 in Ferrari Red @ 194 miles
1998 Ford Contour GL Sport 2.5 V6 5speed in Jet Black @ 164 miles
2001 Chrysler Intrepid R/T 3.5L V6 in Bullet Silver @ 45 miles
2003 Chevrolet Cavalier 2.0 Ecotec in Jet Black @ 27 miles