Stealth Starting Problems
Login  | |
|
Stealth Starting Problems - 4/20/2005 10:22:13 PM
|
|
|
Golden Eye
Posts: 1
Joined: 4/20/2005
Status: offline
|
Hi,
1992 Dodge Stealth, VIN C Twin Turbo 3.0L What I have done:
1. Engine complete rebuild short block up. Got engine back in (took a year, as you know cost$$$).
2. New battery, cables, plugs, wires, timing belt, replaced all vacume hoses.
3. 1st Crank after installing engine, she fired and ran probably 10 minutes, was letting it warm up. Shut down then tightened some brackets ect.
4. Next crank fired up within 30 seconds shut down
5. Let sit 10 minutes fired up shut down in about 30 secs. I'm in a loop here. When it runs it runs great for about 30 secs..
What I have done:
1. Checked fuel pressure OK
2. Checked spark OK
3. Check ECU no codes
4. Replaced fuel pressure Solenoid
5. Replaced MFI relay
6. Replace with ignition module
What I haven't done:
1. Physically take out an inspect ECU
2. Physically take out fuel pump to ensure screen isn't clogged (bear to get out)
I could really use idea's. Thanks
John
|
|
|
|
|
|
|
Printable Version
