Stealth Starting Problems
 

Hi,

1992 Dodge Stealth, VIN C Twin Turbo 3.0L What I have done:

1. Engine complete rebuild short block up. Got engine back in (took a year, as you know cost$$$).

2. New battery, cables, plugs, wires, timing belt, replaced all vacume hoses.

3. 1st Crank after installing engine, she fired and ran probably 10 minutes, was letting it warm up. Shut down then tightened some brackets ect.

4. Next crank fired up within 30 seconds shut down

5. Let sit 10 minutes fired up shut down in about 30 secs. I'm in a loop here. When it runs it runs great for about 30 secs..

What I have done:

1. Checked fuel pressure OK
2. Checked spark OK
3. Check ECU no codes
4. Replaced fuel pressure Solenoid
5. Replaced MFI relay
6. Replace with ignition module

What I haven't done:

1. Physically take out an inspect ECU
2. Physically take out fuel pump to ensure screen isn't clogged (bear to get out)

I could really use idea's. Thanks

John

RE: Stealth Starting Problems
 

I own a Dodge Stealth 1992 Rt in runs for about a minute then shuts down and wont restart,what could I change first to start problem solving what is causing the engine to shut down.Thanks Kevin<>

RE: Stealth Starting Problems
 

check ecu for leaking capacitors, a lot of random problems are because of leaking capacitors.

RE: Stealth Starting Problems
 

Here is the procedure for removing your ECU and what capacitors to check for leakage.
http://www.stealth316.com/2-ecmremoval.htm

RE: Stealth Starting Problems
 

What are capacitors numbers Farades? Which ones to buy?

RE: Stealth Starting Problems
 

scroll down on the link I posted, it lists the capacitors you need.