K&N AIR FILTER SYSTEM
 

I have a 2001 Dodge Dakota QC 4.7 V8 and I want to get the K&N Air Filter system for it but I can't find one for that motor....They offer it for V6 and the 5.9 V8....can anyone advise me where to go


Thanks DGBACE

RE: K&N AIR FILTER SYSTEM
 

You can always build your own or check out http://www.intenseperformance.com/

RE: K&N AIR FILTER SYSTEM
 

Intense Performance makes some good-lookin' stuff. It's really hard to find good intakes for Dakotas. Anybody have any experience with these guys?

RE: K&N AIR FILTER SYSTEM
 

Here you go:

Jegs has the K&N FIPK for you # 599-57-1516 Dakota/Durango 2000-2001 4.7L $267.99

Enjoy![sm=smiley2.gif]

RE: K&N AIR FILTER SYSTEM
 

It's hard to find fault with the K&N system except for the fact they aren't available for everything! There are other choices though. I also have a 2001 Dakota Q/C with the 4.7 in it. I installed an AIRAID system and realized significant performance gains. Check 'em out at www. airaid.com. They have a system specifically for our 4.7's.:)

RE: K&N AIR FILTER SYSTEM
 

You could also check out Volant's intake. I don't know much about their intake for trucks but they are highly looked apon in some of the sport compact market.

I've been debating on getting one of their systems as I think it'd match nicely with my flowmaster exhaust.

check it out... www.volantperformance.com

RE: K&N AIR FILTER SYSTEM
 

i put a k&n air intake on my 99 r/t. i had a problem with it not clearing the hood. the top of the intake was rubbing the underside of the hood which resulted in it breaking.

RE: K&N AIR FILTER SYSTEM
 

JCWHITNEY has them for 00-03 4.7 liter for $294.95

RE: K&N AIR FILTER SYSTEM
 

I found a cold air intake for my '01 4.7L on ebay!! It's not a K&N, but all you are paying for is the name. Mods for the 4.7 are hard to find, but keep trying, they're out there!

RE: K&N AIR FILTER SYSTEM
 

i wouldnt go with a K&n...at least for the 04s, they published the dyno results....absolutely no gains...im waiting on streetandperformance.com to finish one, and 360degreez.com to finish thier prototyping for the 4x4...they ebay ones should be ok, just make sure they properly maintain the IAT sensor and such...