DodgeForum.com
DodgeForum.com Home - Dodge Marketplace - Dodge Photo Galleries - Create an Account
Dodge News - Dodge Recalls & TSBs

Go Back   DodgeForum.com > Dodge Cars > Dodge Neon > 1st Gen Neon




Reply
 
Thread Tools
  #1  
Old 06-28-2008, 12:08 AM
I_Ride_Neon I_Ride_Neon is offline
Record Breaker
 
Join Date: Nov 2007
Vehicle: My mom farted and out I came.
Location: Dubuque, Iowa
Posts: 1,129
Default For sale post. Items added and need to go! Make offers.


Zachary Kellogg
Dubuque Iowa

So first up is the mtx swap stuff. Throw out bearing made noise over the winter. I was told the clutch is aftermarket. I know the tranny that was in there blew up and he got a different one. He told me it has low miles. Shifter is cut down short. Bushings may or may not be there. I dont know until I get into it. It shifts fine. Its in the car still but I can pull it within 48 of payment. I am willing to knock off $70 if you come pull it all. I will help.
I want $350 for all of it obo.
That includes
Shifter and assembly
Pedals
Clutch cable
shift cables
3.55 tranny (I guess)
clutch and flywheel setup
cv axles
and a 96 sohc mtx ecu
Drivers side mm
(I think thats all of it)



ENGINE
I had it in my car and the head got all messed up. So I decided to do the 2.4 swap. So I have no need for this. It seems like the #2 bearing is a little loose and may need to be chaged. It has new pistons, machined rods, machined crank, new rings, new oil pump, new water pump, oil pan, sensors, honed block. I think that about covers it. I have a extra sohc head that can go with it. Prefer pick up. Make offer on the price $250 picked up obo.












Prices shipped are to the lower 48 states only.
I am going to start with parts in my basement, then parts off the car, then my entire garage storage full of neon parts. So watch for the updates.



Base model dark interior door panels. 35 picked up.



Blue trunk lide. 25 picked up. Has scratches and some are kinda big.



Alpine cd deck. Never tested but told it work As-is 30 shipped.




Sohc head just decked. 3 valves have dents on top. I was told it wont effect how it works. No rockers. 135k miles 60 shipped



Manifold that was ported on the top of the runners and ported for a bigger tb. Seems like it needs to be cleaned up. Never used it. 35 shipped.



Custom grind sohc camshaft. *Crane 004* Never got a chance to use. $235 shipped



kyb gr-2 rear struts. New. 85 shipped



Ricer pod #1. This one I used for a while. The rpms and mph is off a little. 35 shipped



Ricer pod #2. Never used it. Doesnt look it the greatest shape. 30 shipped. as-is


Pioneer cd player. Was in my neon and works great. Install kit does not come with it. 45 shipped.


Steering wheel 35 shipped.


sohc header 30 shipped


96 sohc harness 50 shipped.


indiglo setup for 8k tach. Never used. Installed the switch. But never used it. 35 shipped.



4dr windows. $20 each picked up. Have a few sets.

Other stuff will include racing seats with sliders (blue) $250 picked up


Let me know. Offers welcome. I have a bunch of stock neon parts I am looking to get rid of. Like a/c, p/s, heads, interior from 4drs.







Rims. Not sure of the brand name but they are nice. Have winter damage around the edges. (paint chipping and salt eating it) A few curb rash's. 2 of the tires are newer 2 of them are used iwth 50% or less left. $250 pick up.






The mopar ecu 165 shipped




Clarion dual voice coil subs in a band pass box with newer lightning audio amp (800 watt?) Plus wires I have and bass knob 160 picked up.



Aem sohc 5 bolt tru-time cam gear. It was put on put not used. In orignal box. $75 shipped


Srt-4 pistons $70 shipped



96 highline steering column out of a car with cruise control (the switches are not on there but go with it). Steering wheel, air bag and all.
70+shipping obo ( I am going to break it down into a few pieces for shipping)
__________________
-96 neon 2dr
2.4 dohc/srt-4 swap (underway)
mtx
FOR SALE post: http://www.dodgeforum.com/m_1351621/tm.htm
project log
http://www.cardomain.com/ride/2977208
Reply With Quote
Sponsored Links
This ad is not displayed to registered members.
Register your free account today and become a member on Dodge Forums!
  #2  
Old 06-28-2008, 01:36 AM
TOOSTUBBORN2FAIL TOOSTUBBORN2FAIL is offline
Professional
 
Join Date: Feb 2008
Location:
Posts: 198
Default RE: For sale post. Its all going.

caught me at a bad time or i would have taken the struts

if no one takes them, ill take them in 2 weeks from today, tired of my back right corner bouncing around

move + tranny swap = have to wait for struts

my 96 rides so high now because of the amount of weight reduction, that it blew a strut from it topping out, at least thats what im assuming, since one day it worked fine, and the next day there was no damping at all and a pool of oil, the car sits 1 inch higher then stock, its at 2040 pounds with a full tank of gas
__________________
1996 SOHC 2 DOOR BASE
PACESETTER HEADER/GLASSPACK
UNORTHODOX RACING ALTERNATOR ONLY PULLEY
FIDANZA ALUMINUM FLYWHEEL AND 4 PUCK KEVLAR CLUTCH
MOPAR STIFF MOTOR MOUNTS AND PROTHANE RACE INSERTS
VITORS POLY BUSHING BOBBLE STRUT
QUAIFE LSD
Reply With Quote
  #3  
Old 06-28-2008, 12:28 PM
I_Ride_Neon I_Ride_Neon is offline
Record Breaker
 
Join Date: Nov 2007
Vehicle: My mom farted and out I came.
Location: Dubuque, Iowa
Posts: 1,129
Default RE: For sale post. Its all going.

Willing to trade for 2.4 block, crank parts, srt-4 engine parts, fmic, walboro 255, bov, srt-4m turbo wastgate and bov plate.
__________________
-96 neon 2dr
2.4 dohc/srt-4 swap (underway)
mtx
FOR SALE post: http://www.dodgeforum.com/m_1351621/tm.htm
project log
http://www.cardomain.com/ride/2977208
Reply With Quote
  #4  
Old 06-28-2008, 01:17 PM
chenzo chenzo is offline
Professional
 
Join Date: Apr 2007
Location:
Posts: 237
Default RE: For sale post. Its all going.

ill take the tails if they are still available in two weeks as well. i know i talked to you about them before, but the money disappeared. ill get back to you when the money is in my hand, and hopefulyl youll still have them.



__________________
Reply With Quote
  #5  
Old 06-28-2008, 03:08 PM
Captansavaho Captansavaho is offline
Veteran
 
Join Date: Aug 2007
Location:
Posts: 366
Send a message via AIM to Captansavaho
Default RE: For sale post. Its all going.

how much for those seats???
__________________
Reply With Quote
  #6  
Old 06-28-2008, 03:16 PM
I_Ride_Neon I_Ride_Neon is offline
Record Breaker
 
Join Date: Nov 2007
Vehicle: My mom farted and out I came.
Location: Dubuque, Iowa
Posts: 1,129
Default RE: For sale post. Its all going.

270 picked up with the brackets and bolts. They are direct bolt to any neon. With the stock neon sliders.
__________________
-96 neon 2dr
2.4 dohc/srt-4 swap (underway)
mtx
FOR SALE post: http://www.dodgeforum.com/m_1351621/tm.htm
project log
http://www.cardomain.com/ride/2977208
Reply With Quote
  #7  
Old 06-28-2008, 05:52 PM
Paradox Paradox is offline
 
Join Date: Jun 2008
Location:
Posts: 1
Default RE: For sale post. Its all going.

whats the specs on the custom camshaft do you have packaging and spec card.
Reply With Quote
  #8  
Old 06-28-2008, 07:16 PM
I_Ride_Neon I_Ride_Neon is offline
Record Breaker
 
Join Date: Nov 2007
Vehicle: My mom farted and out I came.
Location: Dubuque, Iowa
Posts: 1,129
Default RE: For sale post. Its all going.

I have spec card I am just waiting on it to be mailed. I will know the specs in a few days. But I know its about the same lift as a #14 but a longer duration.
__________________
-96 neon 2dr
2.4 dohc/srt-4 swap (underway)
mtx
FOR SALE post: http://www.dodgeforum.com/m_1351621/tm.htm
project log
http://www.cardomain.com/ride/2977208
Reply With Quote
  #9  
Old 06-28-2008, 07:17 PM
I_Ride_Neon I_Ride_Neon is offline
Record Breaker
 
Join Date: Nov 2007
Vehicle: My mom farted and out I came.
Location: Dubuque, Iowa
Posts: 1,129
Default RE: For sale post. Its all going.

Here are the numbers on the cam.

CHR-226/355-25-10
158-50-06 CR

Magnet has 3153

And another number thats machined in is
1589506 00024475
__________________
-96 neon 2dr
2.4 dohc/srt-4 swap (underway)
mtx
FOR SALE post: http://www.dodgeforum.com/m_1351621/tm.htm
project log
http://www.cardomain.com/ride/2977208
Reply With Quote
  #10  
Old 06-28-2008, 07:32 PM
brushedchrome brushedchrome is offline
Professional
 
Join Date: May 2008
Location: Gobles, MI
Posts: 137
Default RE: For sale post. Its all going.

Ill take the tail lights right now if they are availible. Lemme know! Cash can be in the mail monday.
__________________
1996 SOHC 4dr
MP PCM
Underdrive Pulley
Kirk Long Racing Header
MSD Blaster Coil
Cheap Ass Muffler
Reply With Quote
Reply



Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors










New Sponsors
All times are GMT -4. The time now is 06:20 AM.

© Internet Brands, Inc.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.