Does anyone know where I can get a new a/c clutch bearing for 2001 ram 5.2 L.

__________________
2001 Dodge Ram 1500 5.2
Flowmaster exhaust
AEM cold air intake
Superchips tuner

Been there done that. Just replace the whole unit. Suspect only from the factory but they still have to inspect the compressor seals after taking off the clutch.

__________________
2006 Dodge Ram 2500 QC
5.9L Cummins

i was told u can't replace just the bearings but the whole compressor unit will have to be replaced

Don't waste your time , replace the unit.

__________________
98 RAM 1500 4X4 5.2
Hypertech
Fastman TB
Magnaflow Cat.
Flowmaster American Thunder w/super40
14x3 AC mod

The Clutch assy should be available separately.
If you remove the clutch pulley you can probably get a bearing supply store to match it up. The bearing should have some id numbers stamped on it.
You don't have to discharge they system to remove the clutch assy.

__________________
97 Ram Sport ext 4x4, 5.9L gas, 3" pro comp lift w dual shocks, 3:55 trac lock
Lt305/70R16 Kumho KL-78, K&N FIPK, Mopar Performance wires and cap, Stainless shorty headers, Walker exhaust. All syn lubes. Sirius sat radio! Magellan GPS
2003 Grand Caravan Sport. 3.3L No toys in it. Nobody's cool in a Minivan...