Is there a way to tighten the side mirrors on a 98 durango? Mine shake so bad when i'm driving that you can't even see out of them.

Thanks

the mirror or the housing? if its the housing just remove the door panel and tighten the bolts holding the mirror on

Its the mirror inside the housing that seems loose on both sides

my mirror was doing the same thing. Fell off few weeks later and was hanging from the wires. I just got some good epoxy at the depot. Still shakes minor but not like before.

__________________
2000 Dodge Durango SLT, 5.9L, K&N Air filter, flow master 40 series, BFG AT's , T/S lift.

OUCH!!!

I don't think just epoxy is going to hold. I would rebolt it.

__________________

Also make sure your tires are balanced and check your driveline to rule out any damage. Those 2 things will shake the crap out of you and the 1st thing you'll notice is a shaky mirror.

__________________

2000 Durango 5.9L SLT+ Flowmaster 40 "Custom" Ram Air 31" BFG AT T/A KO's Bilstein Shocks Hidden Hitch Sirius Satelite Radio E-fan conversion Smittybilt brushguard SSU's