Farewell Guys.....

Printable Version

Dodge Forums >> Dodge Trucks >> Dodge Ram >> 2nd Gen Ram >> Farewell Guys.....

Page: [1]

Login Message << Older Topic   Newer Topic >>

Farewell Guys..... - 5/11/2008 5:06:55 PM    jnellydodge Posts: 857 Joined: 1/14/2006 From: North Dakota Status: offline Traded my 98' in this weekend..... . . . . . . For an 04' 1500 laramie QC 4x4 hemi.  Wasnt even really looking, just happened to stop and look at some used ram's to kill some time while waiting for the autoparts store to open up to start buying some parts for a few much needed repairs.  Long story short ended up getting a bargain i just couldnt turn down.  I hope the guys over in the 3rd gen are half as knowledgeable as the 2nd gen.  It's been a good experience as a 2nd gen owner.  Anyways, here she is: Thumbnail Image Thumbnail Image Thumbnail Image Attachment (3) < Message edited by jnellydodge -- 5/11/2008 5:24:10 PM > _____________________________ 2004 Dodge Ram QC LARAMIE 4x4 HEMI Lots of chrome 2006 Honda Aero 750-no mods needed 1995 Polaris Xplorer 400 4x4-2 stroke, not stock, unstoppable Post #: 1

RE: Farewell Guys..... - 5/11/2008 5:39:41 PM    Dontdodgeitramit Posts: 187 Joined: 1/5/2008 From: Union Grove Wi Status: online nice truck congrats man. There a good truck. _____________________________ Last Chance Garage. 2000 Ram 1500 4X4 318 Magnum. (in reply to jnellydodge) Post #: 2

RE: Farewell Guys..... - 5/11/2008 6:01:30 PM    dhvaughan Posts: 2463 Joined: 7/4/2006 From: Gainesville, Ga. Status: offline nice truck.  we'll miss you.  so drop in once in awhile and say hello. _____________________________ 01 1500 Reg Cab 4wd 5.2 auto 3.55 285/75/16 step bar tow hook hypertech 180 3923 trans cool/filter posi-lok powertrax noslip timbren brite-box pioneer head rockford amp/spkr new hughes plenum water pump timing chain oil pump rear seal hoses belt tune up (in reply to Dontdodgeitramit) Post #: 3

RE: Farewell Guys..... - 5/11/2008 6:51:50 PM    ripto Posts: 647 Joined: 9/16/2005 From: Long Island, NY Status: offline Nice to see the 3rd gens still have the flat center console, best feature ever. _____________________________ ''98 Dodge Ram 1500 Laramie SLT, Quad Cab 4x4, 5.9, 360 Flowmaster 40 Delta Flow Dual 2.25" Out Mr. Gasket 14"x3" Round Air Cleaner Magnaflow High Flow Cat AVS In-Channel Window Visors Hypertech PPIII Fastman 52mm TB Autolite 3923''s (in reply to dhvaughan) Post #: 4

RE: Farewell Guys..... - 5/11/2008 8:19:36 PM    Ramman18   Posts: 188 Joined: 2/18/2007 Status: offline Your decision makes no sense to me.  Except for the leather seats.   _____________________________ 1999 1500 4x4 Xcab SB 318 nv3500 hypertech PPIII 180 stat Champion Truckplugs 4071 Flowmaster 50 (in reply to ripto) Post #: 5

RE: Farewell Guys..... - 5/11/2008 8:52:29 PM    Ramdamit98 Posts: 422 Joined: 3/27/2006 From: Houston, B.C. Status: offline Nice new ride. I just did the same thing about three weeks ago. Got bored, took a hemi for a ride and ended up with a deal I couldn't pass up. _____________________________ ''05 Ram 1500 SLT QC Daytona Edition #08090 -4x4, 5.7L Hemi, Auto, 3.92 Gears -Sc Flashpaq #3815, Moto Metal 951 Rims -Fitch Fuel Catalyst, Cheap Ebay CAI (in reply to Ramman18) Post #: 6

RE: Farewell Guys..... - 5/12/2008 4:38:58 AM    jnellydodge Posts: 857 Joined: 1/14/2006 From: North Dakota Status: offline Thanks guys, i'll be sure to hang around and help out whenever i can. quote: ORIGINAL: Ramman18 Your decision makes no sense to me.  Except for the leather seats.   Four real doors, almost 100k less miles, the 98' was in need of repairs, more power, i dont know what doesnt make sense about that. _____________________________ 2004 Dodge Ram QC LARAMIE 4x4 HEMI Lots of chrome 2006 Honda Aero 750-no mods needed 1995 Polaris Xplorer 400 4x4-2 stroke, not stock, unstoppable (in reply to Ramman18) Post #: 7

RE: Farewell Guys..... - 5/12/2008 4:51:37 AM    DevilsReject Toys For Tots Fund Contributor Posts: 7976 Joined: 7/29/2005 From: Indianapolis, Indiana a.k.a Hell Status: offline Nice ride man!!!! You'll find several very knowledgable guys in the 3rd gen section, not to mention the guys who own 3rd gen diesels. All in all, I think you'll find tons of valuable knowledge over there. David, aka Parts/Service, is also a moderator over there, as well as Steve05Ram360 and Drew....and two of them are diesel owners Still, there are several other 3rd gen guys who know their shit and will be happy to toss whatever info they can your way... _____________________________ (in reply to jnellydodge) Post #: 8

RE: Farewell Guys..... - 5/12/2008 2:50:24 PM    HammerZ71 DodgeForum Moderator Posts: 3081 Joined: 7/7/2007 Status: offline Damn Traitor!!!     Oops, I forgot, my sig gives me away!!!   Oh well, join the club. < Message edited by HammerZ71 -- 5/12/2008 5:08:15 PM > _____________________________ '04 QC Hemi 4x4 '02 Jeep Grand Cherokee Overland 4x4 '06 Can Am Outlander 4x4 No "Pavement Queen" here! (in reply to DevilsReject) Post #: 9

RE: Farewell Guys..... - 5/12/2008 5:23:36 PM    Jimmeh   Posts: 30 Joined: 6/11/2006 Status: offline I plan on doing the same thing once my truck is paid for.  I'd rather have the four real doors with way less miles then what I got now, but needed a bigger truck at the time I bought the Dodge.  Hopefully I'll have it paid off by the end of this year. _____________________________ 1992 Ford Ranger XLT Extended cab 4X4 4.0 auto. Lots of mods, and still more to come. 1995 Dodge Ram 1500 SLT 4X4 318 5 speed single cab short box. The work horse. (in reply to HammerZ71) Post #: 10

RE: Farewell Guys..... - 5/12/2008 7:22:03 PM    steve05ram360 Posts: 11401 Joined: 1/22/2004 From: Elk Grove, CA Status: offline Nice... welcome to 3rd gen territory _____________________________ http://www.dodgeforum.com/m_1037052/tm.htm http://s41.photobucket.com/albums/e266/sdoherma/ (in reply to Jimmeh) Post #: 11

RE: Farewell Guys..... - 5/14/2008 6:50:54 PM    farva Posts: 34 Joined: 3/4/2007 Status: offline Funny Enough I drove that truck at dahlstrom motors not that long ago. It was a good ride and well was just wanting to feel the difference between the hemi and my good ole 5.9L V-8. I liked the truck but since my wife worked at Lithia Dodge in Grand Forks I had a good deal if I wanted one. She is a nice riding rig that is for sure. good luck man. _____________________________ 98 Ram QC SLT Larmie 4X4 with the 5.9L V8 with the good ole 4 speed auto. Got a Flowmaster running out the back. 05 SRT-4 Flame Red (sold) 03 Chrysler T&C LX 3.3L V6 (in reply to steve05ram360) Post #: 12

RE: Farewell Guys..... - 5/15/2008 6:55:24 AM    Silver_Dodge Posts: 3588 Joined: 11/3/2004 From: Colorado Springs Status: offline Nice truck.  Good trade.  Congrats! Stop back in the 2nd gen section from time to time though. _____________________________ 1999 Ram 1500, 5.2, 4x4 Mopar Air Intake Fastman 50mm Modded kegger HS 1.7's Edelbrock headers Magnaflow cat Flowmaster Super 40 B&G PCM 4.56' s, Auburn LSD 3" Skyjacker 3" PA body 35" Toyo M/T www.cardomain.com/ride/799288 (in reply to farva) Post #: 13

RE: Farewell Guys..... - 5/15/2008 8:19:30 PM    jnellydodge Posts: 857 Joined: 1/14/2006 From: North Dakota Status: offline quote: ORIGINAL: farva Funny Enough I drove that truck at dahlstrom motors not that long ago. It was a good ride and well was just wanting to feel the difference between the hemi and my good ole 5.9L V-8. I liked the truck but since my wife worked at Lithia Dodge in Grand Forks I had a good deal if I wanted one. She is a nice riding rig that is for sure. good luck man. Really that IS pretty funny, what are the odds.  I see you live in grand forks, I currently reside in Fargo...nice to see another ND member on the forum !! Silver_dodge:  Thanks, I will be sure to stop back here now and then to see whats happening, and help answer any questions i can.  This 2nd gen section rocks...I learned alot about my truck from you guys over the years, and hope to learn alot about my new one over in 3rd gen < Message edited by jnellydodge -- 5/15/2008 8:28:47 PM > _____________________________ 2004 Dodge Ram QC LARAMIE 4x4 HEMI Lots of chrome 2006 Honda Aero 750-no mods needed 1995 Polaris Xplorer 400 4x4-2 stroke, not stock, unstoppable (in reply to farva) Post #: 14

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
SRT Forums
Race News

Dodge Prices

Dodge Trucks & SUVs
Ram Dakota
Durango Nitro

Dodge Cars
Avenger Intrepid
Caliber Magnum
Challenger Neon
Charger Stealth
Daytona Stratus
Dodge Viper

Featured Sponsors

Poll
Now that you've seen the 2008 Dodge Challenger SRT-8, what do you think?
	I Love It, Its Perfect
	I love the looks, but hate the transmission
	I like it, but I want the concept interior
	I like it, but I want the exact concept exterior
	Its ok, but the concept was far better
	Thanks, but I look forward to some changes on the 2009 models.
Poll Results Previous Polls

Top 10 Posters
dustyloins 21132 badstratrt 20815 midnight 17840 vipergts 14491 dodgegirl19 13072 ramfan5.9 12449 steve05ram36 11401 nickoman01 10864 drew 10116 casper 9606

New Vendors
Truxedo
Airaid
Mopar Biz
ATI ProCharger
Motor City Auto Parts
Sonic Electronix
Buy Auto Truck Accessories
Buy Car Floor Mats
Edge Products
AMSOIL - Performance Oil Technology