Heater-A/C Control Calibration (Full Version)

Dodge Forums >> Dodge Trucks >> Dodge Dakota >> 2nd Gen Dakota

Heater-A/C Control Calibration

chillrich -> Heater-A/C Control Calibration (5/9/2008 7:00:11 AM)
Does someone know how to perform the calibration? It is referenced in the service manual but I cannot find the procedure. I had only defrost and floor vents working, found the linkage had come disconnected for the dash vents, this is up high in the dash on the right side of the steering column. The actuator is electric which controls a cam which moves arms to move the plenums.

00DakR/T -> RE: Heater-A/C Control Calibration (5/9/2008 4:59:38 PM)
You might be able to do the same thing with a battery disconnect, but the actual recalibration procedure has to be done with a DRB

chillrich -> RE: Heater-A/C Control Calibration (5/10/2008 9:21:07 PM)
Just disconnect the neg terminal for 30 seconds?

00DakR/T -> RE: Heater-A/C Control Calibration (5/12/2008 8:02:54 PM)
Yeah. That might take care of the recalibration, I'm not sure. To run the actual recalibration procedure, you have to have a DRB

Page: [1]

Return to Dodge Forum home page or view the Full Version of this page.