thinking about rims (Full Version)

Dodge >> Dodge Trucks >> Dodge Dakota >> 1st Gen Dakota

thinking about rims

JaYmZ -> thinking about rims (5/9/2008 3:30:20 AM)
Hello I have 89-basic azz hell dakota:$ old things even has this god awful paint (metallic brown on top, tan for the sides, with some crome kick plates all the way along the base of the body) i wont get started on the interior. I konw most people hear are for lifting witch i was going to do but it would be more than i can aford to do. So im lowering it, 4" in back and 3 in the front. Witch brings me to my point I was thinking about trying to stay with dodge rims and would like to go with 15"s if i remember rite mine are 16" now and was wondering what other rims would fit sutch as stratus, carivan ect....

Crazy4x4RT -> RE: thinking about rims (5/10/2008 4:35:21 PM)
Well as far as lifting can be cheep. It depends on how much and if its 2wd or 4wd. For $30 you can get a 2in lift. For $100 add another 2in. for $80 add another 2in. But if you want to lower thats your choice. As for rims You have 5 on 4.5 . You can get rims from jeeps toyotas. Here is a link with what models and years with bolt patterns. http://www.okoffroad.com/editorial-boltpattern.htm

Bad96_3.9 -> RE: thinking about rims (5/10/2008 6:13:10 PM)
that is the same bolt pattern as mustangs and rangers too, i have seen a early dakota with some 18 inch cobra wheels an i looked really good, and it would probably cost more to lower it then to lift it between the spindels and other crap you would have to buy.

Page: [1]

Return to Dodge Forum home page or view the Full Version of this page.