DodgeForum.com
DodgeForum.com Home - Dodge Marketplace - Dodge Photo Galleries - Create an Account
Dodge News - Dodge Recalls & TSBs

Go Back   DodgeForum.com > Technical Help & Information > Technical Archives > Intake, Headers and Exhaust




Reply
 
Thread Tools
  #1  
Old 05-01-2008, 09:27 AM
05Hemified 05Hemified is offline
 
Join Date: Apr 2008
Posts: 4
Default New dual tube cold air intake for sale.

System uses dual tubes to take in cold air from the open fog light cutouts to allow for increases in air flow, gas mileage, horsepower and lower engine temps.
System utilizes 3" polished aluminum tubing with 2 massive high flow air induction Amsoil cleanable filters that require no oiling. Simply blow the filters clean with any type of compressed air.
System also was designed to use the smallest degree of angle changes to reduce the percentage of airflow lost.
This system comes with everything necessary to install on your Ram Hemi.
(Note: This system is designed to use the factory bumper cutouts for fog lights. If your truck is equipped with fog lights, you need to let me know so that we send you the correct connecting tube. With this system it is advised to not traverse water that may be deeper than 24". Doing so could cause damage.
We are currently researching and developing this product for other makes/models and will look to offer them in the future.

Cost of system with 2 High flow Amsoil EAAU3051-EA filters $270.
Cost of system without air filters $185
Shipping not included.
Reply With Quote
  #2  
Old 05-01-2008, 09:33 AM
01DodgeRam360 01DodgeRam360 is offline
Senior Member
 
Join Date: Apr 2007
Location: Maine
Posts: 2,505
Send a message via AIM to 01DodgeRam360
Default RE: New dual tube cold air intake for sale.

Wow, looks pretty intense.
__________________
Reply With Quote
  #3  
Old 05-05-2008, 04:15 PM
xfeejayx xfeejayx is offline
Captain
 
Join Date: May 2008
Location: Chicago
Posts: 718
Default RE: New dual tube cold air intake for sale.

that seems like overkill to me.
__________________
04' 1500 QC SLT 4x4 HEMI
Magnaflow SI/DO
Infinity w/ Pioneer MP3 deck
Reply With Quote
  #4  
Old 05-08-2008, 10:40 AM
05Hemified 05Hemified is offline
 
Join Date: Apr 2008
Posts: 4
Default RE: New dual tube cold air intake for sale.

Man it runs sweet though..... And I went from getting 11.3mpg to 14.7mpg with just this intake and a straight pipe exhaust.

Of course I only get 14.7 when I drive nicely. The WOT sound is awesome. Truck really woke up with the addition of this. Pulls my 12,000lb 5th wheel much easier too.
Reply With Quote
  #5  
Old 05-08-2008, 01:01 PM
xfeejayx xfeejayx is offline
Captain
 
Join Date: May 2008
Location: Chicago
Posts: 718
Default RE: New dual tube cold air intake for sale.

Quote:
ORIGINAL: 05Hemified
And I went from getting 11.3mpg to 14.7mpg with just this intake and a straight pipe exhaust.
hmm, dat dont sound right
__________________
04' 1500 QC SLT 4x4 HEMI
Magnaflow SI/DO
Infinity w/ Pioneer MP3 deck
Reply With Quote
  #6  
Old 05-08-2008, 03:54 PM
05Hemified 05Hemified is offline
 
Join Date: Apr 2008
Posts: 4
Default RE: New dual tube cold air intake for sale.

Well believe what you want, I went from 11.3 to 12.9 when I cut out my muffler and welded a new piece of 3" stainless steel pipe in its place. Drove it that way for a few months then added the above intake and my mpg went from 12.9 to 14.7.

Not sure where you are from, anywhere near NY?? I can gladly meet with you and drive around for 100miles or so.

Do you want to do the 100 miles with or without the 5th wheel????

Reply With Quote
  #7  
Old 05-12-2008, 05:31 PM
12 volt's Avatar
12 volt 12 volt is online now
Record Breaker
 
Join Date: Aug 2007
Location: roswell New Mexico
Posts: 1,443
Default RE: New dual tube cold air intake for sale.

makes me want to make my own
__________________
98 neon Sport mtx/DOHC audio system, toggle switch ignition, K&N insert
95 neon (parts car)
91 BMW E34

Reply With Quote
  #8  
Old 05-13-2008, 02:31 PM
05Hemified 05Hemified is offline
 
Join Date: Apr 2008
Posts: 4
Default RE: New dual tube cold air intake for sale.

Well I can help you out if you'd like. I have info for all parts needed and where I got them. I just bought enough to make like 5 of these kits, and have a couple left so was looking to sell them.

PM me if you need help making one. I can give you tips if needed also.

As an added note, I thought I could make these real cheap, but when you start adding everything into like a separate oil breather filter, and the better filters, the y-pipe, the cost really starts to climb.

I achieved my goal of getting better gas mileage. This paid for itself in 4 weeks.
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors










New Sponsors
All times are GMT -4. The time now is 09:45 PM.

© Internet Brands, Inc.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.