New To Foum (Full Version)

Dodge >> Dodge Cars >> Dodge Charger

New To Foum

  

Top Banana #3589 -> New To Foum (4/28/2008 11:19:07 AM)

Hello Mopar Fans,

I'm new to the forum; A little about my car:

-Dodge Charger Daytona #3589 (Top Banana)
-I started doing all the regular bolt ons, such as body throttle spacer, Volant CAI, Borla Exhaust and Diablosports Predator Tune.
-It was not enough for me, so about a month ago I had installed an ATI Procharger Supercharger.  It is running at 6-7 psi and I'm
working on upgrading the engine so I can bump it up to 10-16 psi. The problem is that nobody can tell me what upgrades I need to
do; The pistons and rods are an obvious pick but what else?  I have call several performance shops here in Texas (Franks Racing in Houston is one), but they neverget back with me. Does anyone have any advice?

Many thanks,

Mauri (krypto68@gmail.com)

  
73dart -> RE: New To Foum (4/29/2008 6:05:49 AM)

There is a distrubter for the Diable Sport programmer in Monroe, NC I talked to hime the other day and he seemed very knowledgeable about these motors. I dont have his number handy but I got it from thier websight. Maybe you could try him.

MangoInTX -> RE: New To Foum (4/29/2008 6:39:28 AM)

First off welcome to the forum TB 3589.

I have some off topic questions but I promise to get back to topic [&:]

It sounds like you installed the SuperCharger, is that correct?
Who tuned the setup?

74scamp -> RE: New To Foum (4/29/2008 9:16:27 AM)

Again, Welcome to the forum.  Good to have you here. 

I would wonder about the same thing Mango asked - who tuned the set up. I know a guy here who put a SC on his SRT and promptly blew it up - too lean. 

Another thing you'll have to "strengthen" is the tranny. 

Keep us advised and updated on your progress.

Dave

  

Page: [1]

Return to Dodge Forum home page or view the Full Version of this page.