I have been tring to locate a way to mount a new set of rims and tires on my 2005 Magnum for a while now, and haven't had any luck finding a way to. I need at least 1/2" spacer to keep the wheel from rubbing, the problem with that is the studs aren't long enough then.

The rims I have are 5x120 bolt pattern and fit the car, but the offset is off and I'd rather not have to sell them as I like the look.

Does anyone have any suggestions or ideas of how I can make it work?

Thanks!

__________________
'05 Dodge Magnum RT - no frills except the nice heated leather seats!

the correct bolt pattern is 5 X 115. i have 20 x 8.5 rims with a 20mm offset.

__________________
2006 Magnum R/T Panel, worlds fastest N/A 5.7 magnum

IMO, If you need a spacer that large that wheel is not for you. Magnums ride the best with wheels that do not require spacers. I personally don't take "make it work" approach to wheels they are your link to the road. Give it some thought bite the bullet and get the correct wheel specs.

__________________
Strykker - 2005 Magnum R/T
5.7L Hemi Registry # 00619
Magnum Owners Club #1293
Custom Paint by http://www.402motoring.com

MYTOYRT http://www.cardomain.com/ride/2331622/1