HEY OUT THERE,
NEED SOME GOOD INPUT ON PUTTING A CLEAN,OUT OF SIGHT CB RADIO SYSTEM IN MY 2001 RAM? I APPRECIATE ANY ADVICE,
THANKS,ROBERT E.
ELKO,NEVADA

__________________
Robert E

how big is our cb??? glove box... your were our cup holds are.... or the overhead console, thas were i was going to put my corba 19ltd the small one, because i don't have a computer up there, but mines a 95. i went and got a bigger cb and put it below the dash..i can get a pic if u want?. also you have a antenna chord to deal with.

__________________

sorry for my spelling

also i've seen them underneath the driver seat

__________________

Here is where I mounted mine




I mounted the mic bracket to the console. I bent the bracket so that it screws from the inside, not on the outside.

__________________
1998.5 Ram Cummins 24 valve turbo diesel

Nice "tire checker" you got there Mayfair.[sm=icon_beat.gif]

__________________
01 2500 CTD 6 Speed, Exhaust Brake, 90 Gallon Aux Tank, Hypertech Stage 3, Dual Lift Pumps. Running B20 24/7.
96 Ram 1500 318 Magnum, Bone Stock.

that's what i was going to do.....and then what i did

__________________

sorry for my spelling

My 29LTD Classic just lays under the seat.
(What a pain in the ass).
Anytime I want to use it I have to grab under there
while driving most of the time and figure it out from there.
While it's out of the way, there has to be a better spot for it.

I have a Wunder mount for mine and like it a lot. It's not out of sight but like it a lot. It mounts it infront of the passenger side seat.

__________________
2001 Dodge Ram 1500 Offroad Edition with the 360.

Oh something I can actually talk about and am VERY proud about!

So...my cup holder was broken and the oem replacement was stupid high. My CB was mounted on the floor but with cup holder breaking...well you know what happened every dang time i hit a bump hard!

Anyway so one day I F this ripped my cup holder out took it apart. Kept the base of the holder and drilled two hole and mounted my cb in its replacement. Then I bought an ebay cup holder replacement...just do an ebay search for dodge ram cup holder. Below is my install and below that is an image of the cupholder taken from ebay.

__________________
TIMIDONE - 1998 Dodge Ram 1500 V8 5.9L 4WD: Mr.Gasket 14" Air Cleaner w/ K&N 14"x3" #1650 filter w/ Super 44 Flowmaster Exhaust, BFGoodrich All Terrain T/A KO 285/75R16

this is the bubba-bracket BB-29.

__________________
01 1500 Reg Cab 4wd 5.2 auto 3.55 285/75/16 nasta step bar tow hook hypertech 180 3923 trans cooler/filter posi-lok powertrax noslip timbren brite-box pioneer head rockford amp/speaker cobra cb firestick hughes plenum water pump timing chain oil pump rear seal front bearings cracked dash