hello everyone i have a 1987 dodge d100 i havestripped parts off of to rebuild my 87 dodge d150 which is still a work in progress if you need a part and i have it i will sell it to ya.i still need money for other things i dont have usable parts for.i also have a complete engine i pulled myself out of a 82 dodge prospector which was running when i pulled it last year, i think it would be a good one to rebuild it is a 318(canadian built i think) the truck was used on a sweet potato farm most of its life. the 87 d100 still has the tranny in it and works good or it did when i parked it back in september 2007 i noticed the torque converter has slipped out somewhat and the fluid has drained everywhere after i pulled the motor and the cable i used to tie it up with strectched.the truck was used as a local pest control vehicle so it has been well used also. remember to think about shipping when you seek parts i live in northeastern mississippi. thank ya lots.

im gonna finish stripping this truck in the next few days then i am gonna hual it to the scrap yard i was told i could get like 150 bucks for the body and frame and that will be my new exhaust system....no more pulpwood truck sound yea! then i need a 4bbl intake and a carb for my little 318 and then paint this summer and new seat and so on.....anyways i wont be keeping the old parts truck .i hate to see it go but sacrifices have to be made for the better ofole bessy....

Can we get some pics,interior,sides,rear,thanks.

im absent minded here are a few pics i just ran out and snapped

I would part it out, you`ll make much more than $150. The vent galss alone sells for $85, $150 per door. You can get alot more by selling parts.

need a passenger side tailight

nemesis the tail light lens on both sides are no good they are broken up.the bulb sockets and wires are in good shape.also for any further inquiries from anyone the headlight doors/bezels are no good but the bulb sockets and wires are in good shape. the ones on my truck also had to be replaced i bought them from partstrain.com through their ebay auction for 15 dollars a piece for tail lights and i got the headlight doors for 12 dollars a piece ......

wow 1996Ram318 i had no idea those little windows were so high the ones i have are in good shape. does that include the handle or is that just for the glass itself? i guess 20 dollars a piece would be fair then huh!

thanks anyhow man.

wow i posted some huge pics im gonna try to make them bigger so we can see better.

do you have the trim for all 4 wheel wells? id like it for the whole truck but im having trouble geting it.

ORIGINAL: javatman

im gonna finish stripping this truck in the next few days then i am gonna hual it to the scrap yard i was told i could get like 150 bucks for the body and frame and that will be my new exhaust system....

Check with your local salvage yard before you haul anything in. They are paying $120-175 a ton here in Kansas right now. Some of the places calculate the weight off of the title which is pretty much a rip off. The places you want are the ones where they weigh the trailer/truck going in and the trailer coming out and pay you for actual weight. You can also throw scrap metal in with it. I'm going to be hauling in some stuff for my uncle soon and have collected washers, driers, water heaters, etc. to throw in the back of a van we are junking.

I just got a parts truck for the cost of gas to pick it up. A friend of mine's dad had it. Ran and drove fine except for a tranny leak when it was parked a couple of years ago.

Derek

http://i237.photobucket.com/albums/ff16/PushnFords/dodge-1.jpg

nemesis ,yes i do have the trim for all four wheel wells i will take them off in the morning and post a picture of them for you to see whether or not you want them.i just looked at them with a flashlight and they are going to need some straightening out but they are intact.if you do want them ill take 20 dollars for the whole set with the screws plus what it cost to ship them to ya.


thanks for the info pushnfords,looks like you got a nice ram there. you should refurb it......our scrap yard pays by wieght here they weigh you goin in and coming out and yes i plan on putting as much as i can on it when i go....they are paying 100 dollars a ton as of monday when i talked to the crane operator there.

ORIGINAL: javatman

thanks for the info pushnfords,looks like you got a nice ram there. you should refurb it......our scrap yard pays by wieght here they weigh you goin in and coming out and yes i plan on putting as much as i can on it when i go....they are paying 100 dollars a ton as of monday when i talked to the crane operator there.



Yea, I hate to use that '85 as a parts truck. Rust free, highly optioned, one dent in the passenger rocker panel etc. But I need a 4wd. So the plan is to put the cab, engine, and front clip on my 4wd frame. I'd love to swap the bed too but when the PO put the flatbed on my truck they cut off the rear of the frame rail to make it fit!

Derek

http://i237.photobucket.com/albums/ff16/PushnFords/DodgeW150.jpg

ok i took off the wheel well trim this morning and washed them up they are not as pretty a set as i thought i tried to take some good photos for you too look at nemesis......




hey that should be a good flat bed truck when you get it swapped out Derekthough it is a job trying to rework and update these ole rams. i have thought several times i was wasting my time on mine but i have grown to like fixing the ole gal up.i hope to have her lookin good next year.good luck on your swap...if you have questions this is the place to get ansewers...

where are you? im in Whitby, Ontario. need to figure out ship;pign

i will be shipping out of Ecru,MS U.S.A. 38841-9723 5lb package.i dont know your shipping zone/zipcode they are like 3 different ones for Whitby, Ontario Canada. the postal service says they cant give me a price until i know the address and so did UPS...

sorry ive got trouble remembering all 50 state abbreviations. MS is MiSsouri or of MineSota? Ive got no idea how to do any of this. ill PM you specifics, you reply with how you want me to pay

hey nemesis i sent a pm dont know if you got it or not but shipping is 30 dollars from mississippi where i live and i dont think the trim is worth shipping plus cost of trim.....my professional opinion

it sure isnt

im glad you agreed...i think i will just take off a few things more i feel worthwhile and sellthe thingfor scrap. there are so many old dodges running around here i think if i need a part ill be able to find it.....besides gas is going so high i may park mine for a while till i figure out my next move on it..i almost soldher the other day for what i got in her was very tempting......

update on the ole parts truck.i have everything off and out of the doors finally so i have everything for the doors but weather stripping and all the interior plugs off the wiring harness.i was pondering taking like the parking brake and stuff off too but was wondering what some of you think should i completely strip the cab of everything??????

well i have made arrangements for my brother in law to come take this headache to the yard thursday on his trailer i will take some pics of it at the scrap yard if they will let me watch them destroy it.i will definitelyhave a few beers in celebration !!!!!

YEE HAW!!!! she is gone ,gone.....i finally got to get rid of the ole 87 d100 parts truck today a few days later than i wanted due to tornadoes coming through my area boy we have been blessed so far no damage to my place but all around us has been blown around we have seen several funnel clouds come right over us and then come down......by the way the truck brought 173.40 at the yard.i got top dollar for having it stripped out....weight was 2040lbs.

local://upfiles/87169/DA224A8BA4C942AF920090D9E97269A4.jpg

local://upfiles/87169/3DE478DB46F24FD3A3A7B7E03F1CEA19.jpg

local://upfiles/87169/4156945AFC5542B8B88E5D3DE73AE765.jpg

local://upfiles/87169/3969E0BCD2DF4C33B08894A738D8956C.jpg

local://upfiles/87169/E8C917AEC556403ABE5D49CAC115CE09.jpg