RE: damn ricers
Login  | |
|
RE: damn ricers - 3/18/2008 8:09:38 PM
|
|
|
herkguy
Posts: 241
Joined: 2/27/2007
Status: offline
|
ummmmmmmm...where did that come from?
Hey did you guys make it to the track?
Oh you could also put in lower gears in the rear end. You should have 3.92 stock ratio so maybe a 4.11 or 4.56 ratio would work. These can be very helpful if you do cam it as your motor will like a little higher rpm for its power band. Just remember that you will need a sticky tire for the launch or you will loose the race spinning the tires..........lol
< Message edited by herkguy -- 3/18/2008 8:24:26 PM >
_____________________________
06' Laramie QD cab 4x4
4.7HO, TRX4, Tow, curtain Airbags, htd seats
added: Truxedo cover, door sill covers, rear mud guards, Airaid JR and modified airbox intake, Fastman TB, Gibson exhaust
Prev: 94 Dak 4x4 5.2 5spd, 01 Dak 4x4 QD cab 4.7
|
|
|
|
|
|
|
RE: damn ricers - 3/19/2008 12:16:12 PM
|
|
|
synacism
Posts: 22
Joined: 2/16/2008
Status: offline
|
I made it. My buddy backed out. But he said that he'll come with me this sat. I only ran the 8th and i pulled a 9.564 (best out of three). We'll see if he makes it this weekend. Either way i'm going. I'm addicted to this shit. I 'll race once more this weekend, and then i don't get another weekend off for five weeks (work rotation). my goal is to improve something at least every five weeks, and then race again.
_____________________________
Sgt. Micahel Hamre
|
|
|
|
|
RE: damn ricers - 4/8/2008 11:29:03 PM
|
|
|
KillClutch
Posts: 13
Joined: 4/1/2008
Status: offline
|
get some wider tires. and a locker rear like a powertrax, and get some cal trax, you get out of the hole real quick.
_____________________________
99 Dakota racing piston, pins, rings, headers, hi perf cat, flowmaster 40's, vortech s/c, powertracks rear diff, 30lb injecters, shift kit, 2200 stall speed, intake manifold, throttle boddie, rockers, DFI computer system, cam, pushrods, heads
|
|
|
|
|
Printable Version
