MyGIG RER radio wiring (for IPOD) (Full Version)

Dodge Forums >> Dodge Cars >> Dodge Avenger >> 2008 Dodge Avenger

MyGIG RER radio wiring (for IPOD)

  

nightshade72 -> MyGIG RER radio wiring (for IPOD) (2/28/2008 3:23:14 PM)

I was wondering if anyone has access to the connector pinout on the back of the RER radios.

I am trying to determine if I can connect the ipod integration cable into the RER radio. specifically I am looking for the 10 pin connector that currently goes to the rearview mirror and mic..

I have wires in 1,2,4,8 and 8 but nothing in the rest. I am thinking that the ipod cable probably uses the other 5 wires somehow but am just guessing.

Anyone able to give me insight into what each of the lines out of the radio on those 10 points are?


1 light green/dark green
2 dark green/light green
3 no wire
4 green/orange
5 no wire
6 no wire
7 Green/Pink?
8 Orange/White
9 no wire
10 no wire

  
milous -> RE: MyGIG RER radio wiring (for IPOD) (2/28/2008 6:47:21 PM)

quote:

ORIGINAL: nightshade72

I was wondering if anyone has access to the connector pinout on the back of the RER radios.

I am trying to determine if I can connect the ipod integration cable into the RER radio. specifically I am looking for the 10 pin connector that currently goes to the rearview mirror and mic..

I have wires in 1,2,4,8 and 8 but nothing in the rest. I am thinking that the ipod cable probably uses the other 5 wires somehow but am just guessing.

Anyone able to give me insight into what each of the lines out of the radio on those 10 points are?


1 light green/dark green
2 dark green/light green
3 no wire
4 green/orange
5 no wire
6 no wire
7 Green/Pink?
8 Orange/White
9 no wire
10 no wire

This is what I show, colors are a little different than your list: 





1
Dark Green/ Orange
LEFT AUDIO OUTPUT

1
Light Blue / Dark Green
MICROPHONE 2 IN (+))

2
Dark Green / Yellow
RIGHT AUDIO OUTPUT

2
Dark Green / Dark Blue
MICROPHONE 1 IN (+))

3
- -
- -

4
Dark Green / Yellow
MICROPHONE FEED

5
- -
- -

6
Dark Green
COMMON AUDIO OUTPUT

7
Dark Green / White
MICROPHONE IN (-)

8
Orange / Gray
SENSOR GROUND

9
- -
- -

10
- -
- -

futil -> RE: MyGIG RER radio wiring (for IPOD) (2/28/2008 6:56:06 PM)

I was going to write them up for you but someone already posted them on Nitro Forumz, So why rewrite a completed work.. Ill just repost them..
 
Props for this post goes to Bch, and  NitroTech of Nitro Forumz
http://www.nitroforumz.com/showthread.php?t=390
 
 
Radio C1 - Gray 10 Pin
Hands Free (U-Connect)


Code:1 18LB/DG LEFT AUDIO OUTPUT
2 18DG/LB RIGHT AUDIO OUTPUT
3 -
4 18DG/YL MICROPHONE FEED
5 -
6 18DG COMMON AUDIO OUTPUT
7 18LB/DG MICROPHONE IN (-)
8 18OR/GY SENSOR GROUND
9 -
10 -


Radio C2 - Gray 22 Pin
Audio


Code:1 18RD FUSED B(+) (I.O.D.)
2 20WT CAN INTERIOR BUS (-)
3 -
4 -
5 -
6 -
7 18GY/OR AMPLIFIED ANTENNA FEED
8 18GY/LG LEFT REAR SPEAKER (+)
9 18GY/DG LEFT REAR SPEAKER (-)
10 18DG/LG RIGHT REAR SPEAKER (+)
11 18DG/GY RIGHT REAR SPEAKER (-)
12 18BK/WT GROUND
13 20WT/OR CAN INTERIOR BUS (+)
14 -
15 -
16 -
17 -
18 -
19 18DG/VT RIGHT FRONT SPEAKERS(+)
20 18DG/YL RIGHT FRONT SPEAKERS(-)
21 18GY/VT LEFT FRONT SPEAKERS(+)
22 18GY/YL LEFT FRONT SPEAKERS(-)


Radio C3 - White 22 Pin
Rear-Seat Video Montior


Code:1 18GY/LB AUDIO RETURN 3
2 -
3 -
4 -
5 18GY/BR VIDEO SIGNAL 1
6 18GY/YL VIDEO COMMON 1
7 VDO-VIDEO SHIELD 1
8 18GY/LB VIDEO SIGNAL 2
9 18GY/YL VIDEO COMMON 2
10 VIDEO SHIELD 2
11 18GY/OR AUDIO RETURN 2
12 18DG/VT AUDIO LEFT 3
13 18DG/YL AUDIO RIGHT 3
14 -
15 -
16 -
17 -
18 18DG/TN AUDIO LEFT 1
19 18GY/VT AUDIO RETURN 1
20 18DG/WT AUDIO RIGHT 1
21 18DG/LB AUDIO LEFT 2
22 18DG/DB AUDIO RIGHT 2[image]http://i218.photobucket.com/albums/cc267/futilz/radioc1pinoutdi4.png[/image][image]http://i218.photobucket.com/albums/cc267/futilz/radioc2pinoutwa1.png[/image][image]http://i218.photobucket.com/albums/cc267/futilz/radioc3pinoutjn4.png[/image]




[image]http://i218.photobucket.com/albums/cc267/futilz/Radio2.jpg[/image]

[image]http://i218.photobucket.com/albums/cc267/futilz/Radio1.jpg[/image]

nightshade72 -> RE: MyGIG RER radio wiring (for IPOD) (2/28/2008 7:29:46 PM)

Thanks so much.

Now to find the pinout to the ipod connection cable.  It plugs into the uconnect and since they all now have ipod control embedded, may be able to get that working.. dealership sold me the cable with the car but couldn't get it working.. they ahve chrysler engineering working on it though.

Really would like to have proper ipod controls available as syncing tunes to the mygig is a bit time consuming.. would rather just plug in my 160Gb ipod directly and be done with it.  :)



futil -> RE: MyGIG RER radio wiring (for IPOD) (2/28/2008 8:05:49 PM)

Does the iPod kit allow integrated controls with the radio? or is it just an expensive Aux plug? I havnt even looked at the kit so I have no clue..

nightshade72 -> RE: MyGIG RER radio wiring (for IPOD) (2/28/2008 8:24:20 PM)

Supposed to allow for integration.

Pod Integrated Interface Cable. Simply plug your iPod into the custom cable located in the glove box and you're ready to go. iPod integration means you can navigate your iPod through your radio controls. With this simple "plug and play" hook up, your iPod stays securely attached, outof view and continually charging.

iPod interface cable required to connect iPod to exisitng factory installed UConnect module with iPod integration (UCI).

I don't know if it will work.. I know it works on the RES, REN and REQ radios.  Can't see why it wouldn't work on the RER.. worth looking into..

Chrysler engineering said it should work.. so will see..



quote:

ORIGINAL: futil

Does the iPod kit allow integrated controls with the radio? or is it just an expensive Aux plug? I havnt even looked at the kit so I have no clue..

Brokay2 -> RE: MyGIG RER radio wiring (for IPOD) (3/12/2008 10:38:32 AM)

Does this require a special UCI module? I have factory installed uconnect and purchased a 82211263 cable that plugs right into it but my ipod is not being found. If it does require a different module do you have any idea what the part number would be. Any help would be greatly appreciated.

Forgot to say that my radio is a REQ not the mygig.

quote:

ORIGINAL: nightshade72

Supposed to allow for integration.

Pod Integrated Interface Cable. Simply plug your iPod into the custom cable located in the glove box and you're ready to go. iPod integration means you can navigate your iPod through your radio controls. With this simple "plug and play" hook up, your iPod stays securely attached, outof view and continually charging.

iPod interface cable required to connect iPod to exisitng factory installed UConnect module with iPod integration (UCI).

I don't know if it will work.. I know it works on the RES, REN and REQ radios.  Can't see why it wouldn't work on the RER.. worth looking into..

Chrysler engineering said it should work.. so will see..



quote:

ORIGINAL: futil

Does the iPod kit allow integrated controls with the radio? or is it just an expensive Aux plug? I havnt even looked at the kit so I have no clue..


milous -> RE: MyGIG RER radio wiring (for IPOD) (3/12/2008 12:59:06 PM)

quote:

ORIGINAL: Brokay2

Does this require a special UCI module? I have factory installed uconnect and purchased a 82211263 cable that plugs right into it but my ipod is not being found. If it does require a different module do you have any idea what the part number would be. Any help would be greatly appreciated.

Forgot to say that my radio is a REQ not the mygig.

82211263 is the cable for 2008 vehicles with the Mopar UConnect.

82210787AB is the cable for 2008 vehicles with the factory UConnect.

Brokay2 -> RE: MyGIG RER radio wiring (for IPOD) (3/12/2008 1:25:05 PM)

I have that one also but I see no place for it to connect. The 82211263 has a square ten pin connector and is about three to four feet long, which will plug into the UCI but the 82210787AB has a rectangler connector and is only about a foot long, can't remember how many pins, which I see no place for.
Now I have read somewhere that there should be a connector in the glove box, which is probably where the 82210787AB connects and I don't have that. If that is the case then there should be another harness that my car is missing and where it would come from I have no idea.

quote:

ORIGINAL: milous

82211263 is the cable for 2008 vehicles with the Mopar UConnect.

82210787AB is the cable for 2008 vehicles with the factory UConnect.

milous -> RE: MyGIG RER radio wiring (for IPOD) (3/12/2008 2:58:49 PM)

quote:

ORIGINAL: Brokay2
I have that one also but I see no place for it to connect.

Is there a harness bundled to the left of the glovebox (outside of the glovebox)? Maybe you have to roll-down the glovebox to access the connector and feed it into the glovebox...

Brokay2 -> RE: MyGIG RER radio wiring (for IPOD) (3/12/2008 7:59:04 PM)

I'll have to dig into it and see. I'll post back later what I find.

Thanks for the help

quote:

ORIGINAL: milous

quote:

ORIGINAL: Brokay2
I have that one also but I see no place for it to connect.

Is there a harness bundled to the left of the glovebox (outside of the glovebox)? Maybe you have to roll-down the glovebox to access the connector and feed it into the glovebox...

Brokay2 -> RE: MyGIG RER radio wiring (for IPOD) (3/21/2008 5:22:49 PM)

Well after alot of digging I was still unable to find a connector for the ipod cable. Now my question is, does anybody actually have a glowbox connector for their ipod?

jaybee -> RE: MyGIG RER radio wiring (for IPOD) (3/29/2008 7:53:30 AM)

Hello, I have 2008 REW radio, an European version of RER. It is supposed to have uconnect integrated. I have got a  ....63 cable. It has square connector and is supposed to be connected to uconnect module under dash on right side of the glove box. Of course there is no device at that place in my car. So i tried to connect it directly to radio (to square connector in middle). It fits, but neither uconnect nor iPod worked. So now I am waiting for 3rd party solution - peripheral CHYP device (well, they claim it will not work either, but I dont give up - if it emulates VES system then it sould work!)

milous -> RE: MyGIG RER radio wiring (for IPOD) (3/29/2008 1:19:48 PM)

quote:

ORIGINAL: jaybee

Hello, I have 2008 REW radio, an European version of RER. It is supposed to have uconnect integrated. I have got a  ....63 cable. It has square connector and is supposed to be connected to uconnect module under dash on right side of the glove box. Of course there is no device at that place in my car. So i tried to connect it directly to radio (to square connector in middle). It fits, but neither uconnect nor iPod worked. So now I am waiting for 3rd party solution - peripheral CHYP device (well, they claim it will not work either, but I dont give up - if it emulates VES system then it sould work!)

The "...63" cable is for vehicles with the Mopar UConnect, the "...87" cable for vehicles that came with factory UConnect.

jaybee -> RE: MyGIG RER radio wiring (for IPOD) (3/29/2008 1:37:14 PM)

"Part # 82210787AB - For use on models equipped with factory UConnect and 4th generation radios (RES, REQ and REN). Currently NOT compatible with RER MyGIG navigation radios."

"Part # 82211263AB - For use on models equipped with Mopar accessory UConnect and 4th generation RES, REQ and REN radios. Currently NOT compatible with RER MyGIG navigation radios"

WOW. How to connect iPod to RER Radio then? :-)

  

Page: [1] 2   next >   >>

Return to Dodge Forum home page or view the Full Version of this page.