parting out my 96 avenger

Printable Version

Dodge Forums >> Dodge Cars >> Dodge Avenger >> 1995-2000 Dodge Avenger >> parting out my 96 avenger

Page: [1] 2 3 4 5   next >   >>

Login Message << Older Topic   Newer Topic >>

parting out my 96 avenger - 1/21/2008 7:13:21 PM    blackvenge34   Posts: 362 Joined: 10/15/2006 Status: offline i have a 96 avenger timing belt went and the motor is junk i am parting it out if u need a part let me know it has blue short ram intake headers catback exhaust urethane viper body kit i have an eclipse center console msd coil pack and any other parts you need let me know. new clutch put in last winter along with a trans the car has 106,000 on it now look at my pic thats what it looks like let me know thanx _____________________________ Thanks, Bryan -------------------------------------------------------------------- Post #: 1

RE: parting out my 96 avenger - 1/21/2008 9:20:32 PM    scatpackmopar   Posts: 220 Joined: 6/5/2004 Status: offline My timing belt broke at 160K miles. It cost me $1500 for a new head and labor to fix it better than new. I now have 234K+ miles on it with no problems. So the car isn't worth saving? I didn't want to give up the most reliable car I have ever owned and 34MPG over a broken timing belt. < Message edited by scatpackmopar -- 1/22/2008 6:13:52 AM > (in reply to blackvenge34) Post #: 2

RE: parting out my 96 avenger - 1/22/2008 5:54:51 AM    73dart Posts: 96 Joined: 5/19/2007 Status: offline I have a spare 420a I got from a salvage yard for the valve lash adjusters. I don't know what the internals look like but it will rotate if you might be interested in it we might could work a deal out. _____________________________ 1996 Cummins 2500 4x4, 100 plate full forward, 3kgsk , 370 injectors, S300 62/14 turbo, 5" commercial truck muffler, 5" twin stacks, 33" mudders, NV-4500 swap, SB Con-FE 13" upgrade. 1973 Dart Swinger 2007 Charger R/T Road and Track Package (in reply to scatpackmopar) Post #: 3

RE: parting out my 96 avenger - 1/22/2008 9:51:47 AM    PappiDread6 Posts: 1341 Joined: 7/24/2006 Status: offline Don't sell it cuz of a timing belt. You put too much into that car. (in reply to 73dart) Post #: 4

RE: parting out my 96 avenger - 1/22/2008 1:45:50 PM    InfiniteZero   Posts: 58 Joined: 9/15/2007 Status: offline Well if you do decide to sell it, how much would you want for the car altogether?  _____________________________ 98 Dodge Avenger 2.5 V6 ES (in reply to PappiDread6) Post #: 5

RE: parting out my 96 avenger - 1/22/2008 5:13:28 PM    TheZephire   Posts: 67 Joined: 12/9/2007 Status: offline see now im a little upset, i posted here before anyone, i was the first one, i said i wanted the bodykit, and the eclipse councel. and i saw the post here, and now its gone... why? did i do something? (in reply to InfiniteZero) Post #: 6

RE: parting out my 96 avenger - 1/22/2008 7:53:34 PM    PappiDread6 Posts: 1341 Joined: 7/24/2006 Status: offline u gonna have to take it up with one of the moderators. Are you sure you posted in the right thread? (in reply to TheZephire) Post #: 7

RE: parting out my 96 avenger - 1/22/2008 8:38:06 PM    blackvenge34   Posts: 362 Joined: 10/15/2006 Status: offline ok i cant let the kit go for anyless then 500 plus shipping its poly eurethane and its worth about 1000 which is what i paind for it the center console 10$ plus shipping ill get a pics when i can something bout the console you know where you screw on the shift boot one of the things where you screw in the boot is broken unless u can figure a way to rig it or something i also have a short shifter too and i have in ne one is interested just email me at golbry25@pct.edu or leave a post with wat you want as for the whole car anywhere from 1000 to 1500 and you gotta pay shipping unless you live close im right outside philadelphia, pa it needs body work on the passenger side reason i want to sell its not just the head its the whole motor i was doing bout 80mph when it happend and the are peices of metal everywhere and peices of the head where they shouldnt be so i need a new motor _____________________________ Thanks, Bryan -------------------------------------------------------------------- (in reply to PappiDread6) Post #: 8

RE: parting out my 96 avenger - 1/23/2008 7:52:52 PM    TheZephire   Posts: 67 Joined: 12/9/2007 Status: offline ok well, as long as the eclipse council will work. i am interested in the body kit, but i just wanna know how you put it on? screws, rivets, fusor, and i see you didnt fade the panals in, are these sideskirts and bumper harder to fade in ? (in reply to blackvenge34) Post #: 9

RE: parting out my 96 avenger - 1/23/2008 8:24:41 PM    blackvenge34   Posts: 362 Joined: 10/15/2006 Status: offline i used screws for skirts and rear lip but didnt mold it or nething just kinda threw it on with the intention of doing it right later but not any more lol _____________________________ Thanks, Bryan -------------------------------------------------------------------- (in reply to TheZephire) Post #: 10

RE: parting out my 96 avenger - 1/23/2008 8:26:19 PM    blackvenge34   Posts: 362 Joined: 10/15/2006 Status: offline as far as the console it goes right in and fits i can also throw in the center console kick panels for an extra 20 _____________________________ Thanks, Bryan -------------------------------------------------------------------- (in reply to blackvenge34) Post #: 11

RE: parting out my 96 avenger - 1/24/2008 12:56:31 PM    TheZephire   Posts: 67 Joined: 12/9/2007 Status: offline i want everything to be able to put in a eclipse center council (in reply to blackvenge34) Post #: 12

RE: parting out my 96 avenger - 1/24/2008 6:57:27 PM    blackvenge34   Posts: 362 Joined: 10/15/2006 Status: offline all you need is the kick panels and center console also the radio trim but i broke mine not the trim that goes around the hvac controls and radio but what the radio actually fits in i think they are like 20 at best buy or u can ebay it _____________________________ Thanks, Bryan -------------------------------------------------------------------- (in reply to TheZephire) Post #: 13

RE: parting out my 96 avenger - 1/26/2008 1:17:23 PM    TheZephire   Posts: 67 Joined: 12/9/2007 Status: offline yea thats no big deal. is this a v6 or a i4? (in reply to blackvenge34) Post #: 14

RE: parting out my 96 avenger - 1/26/2008 5:34:52 PM    73dart Posts: 96 Joined: 5/19/2007 Status: offline How much for the rims? _____________________________ 1996 Cummins 2500 4x4, 100 plate full forward, 3kgsk , 370 injectors, S300 62/14 turbo, 5" commercial truck muffler, 5" twin stacks, 33" mudders, NV-4500 swap, SB Con-FE 13" upgrade. 1973 Dart Swinger 2007 Charger R/T Road and Track Package (in reply to TheZephire) Post #: 15

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
SRT Forums
Race News

Dodge Prices

Dodge Trucks & SUVs
Ram Dakota
Durango Nitro

Dodge Cars
Avenger Intrepid
Caliber Magnum
Challenger Neon
Charger Stealth
Daytona Stratus
Dodge Viper

Featured Sponsors

Poll
Now that you've seen the 2008 Dodge Challenger SRT-8, what do you think?
	I Love It, Its Perfect
	I love the looks, but hate the transmission
	I like it, but I want the concept interior
	I like it, but I want the exact concept exterior
	Its ok, but the concept was far better
	Thanks, but I look forward to some changes on the 2009 models.
Poll Results Previous Polls

Top 10 Posters
dustyloins 21161 badstratrt 20848 midnight 17863 vipergts 14501 dodgegirl19 13072 ramfan5.9 12450 steve05ram36 11410 nickoman01 10864 drew 10116 casper 9606

New Vendors
Truxedo
Airaid
Mopar Biz
ATI ProCharger
Motor City Auto Parts
Sonic Electronix
Buy Auto Truck Accessories
Buy Car Floor Mats
Edge Products
AMSOIL - Performance Oil Technology