Replacing fog light bulbs

Printable Version

Dodge Forums >> Dodge Cars >> Dodge Avenger >> 2008 Dodge Avenger >> Replacing fog light bulbs

Page: [1]

Login Message << Older Topic   Newer Topic >>

Replacing fog light bulbs - 1/20/2008 10:55:41 AM    fenderman   Posts: 36 Joined: 6/4/2007 Status: offline Hey, anyone replace their fog bulbs yet? My driver sider blew, but it seems like I need to remove the plastic fender molding to get to the bulb. Anyone do it? Which screws did you remove? Post #: 1

RE: Replacing fog light bulbs - 1/22/2008 6:34:55 AM    Silkk19 Posts: 30 Joined: 9/14/2007 Status: offline I removed two screws on the fascia that sits right in front of the wheel.  You may have to turn the wheel to get to it.  Once you unscrew the two screws you have to pull back to fascia a bit so you can get your hand in there.  It will seem a little awkward because you have to pull the fascia out of the wheel well, if that makes sense.  Than about a foot in is the bulb connection where all you do is turn and disconnect the cable and install the new bulb.  Hope that helps.  Let me know if you got it to work. _____________________________ 2008 Avenger AWD R/T (in reply to fenderman) Post #: 2

RE: Replacing fog light bulbs - 1/27/2008 12:24:26 PM    fenderman   Posts: 36 Joined: 6/4/2007 Status: offline quote: ORIGINAL: Silkk19 I removed two screws on the fascia that sits right in front of the wheel.  You may have to turn the wheel to get to it.  Once you unscrew the two screws you have to pull back to fascia a bit so you can get your hand in there.  It will seem a little awkward because you have to pull the fascia out of the wheel well, if that makes sense.  Than about a foot in is the bulb connection where all you do is turn and disconnect the cable and install the new bulb.  Hope that helps.  Let me know if you got it to work. Hey, Just had time to change the bulb. I misunderstood your post and first removed the 2 clips on the bottom. Then I realized that you meant the 2 hex screws on the side. Since I had the bottom clips off i was able to remove the bottom hex screw and pull out the fascia to change the bulb, but it would be much easier if i did it your way. Major pain either way. Thanks (in reply to Silkk19) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
SRT Forums
Race News

Dodge Prices

Dodge Trucks & SUVs
Ram Dakota
Durango Nitro

Dodge Cars
Avenger Intrepid
Caliber Magnum
Challenger Neon
Charger Stealth
Daytona Stratus
Dodge Viper

Featured Sponsors

Poll
Now that you've seen the 2008 Dodge Challenger SRT-8, what do you think?
	I Love It, Its Perfect
	I love the looks, but hate the transmission
	I like it, but I want the concept interior
	I like it, but I want the exact concept exterior
	Its ok, but the concept was far better
	Thanks, but I look forward to some changes on the 2009 models.
Poll Results Previous Polls

Top 10 Posters
dustyloins 21158 badstratrt 20848 midnight 17861 vipergts 14501 dodgegirl19 13072 ramfan5.9 12450 steve05ram36 11409 nickoman01 10864 drew 10116 casper 9606

New Vendors
Truxedo
Airaid
Mopar Biz
ATI ProCharger
Motor City Auto Parts
Sonic Electronix
Buy Auto Truck Accessories
Buy Car Floor Mats
Edge Products
AMSOIL - Performance Oil Technology