MyGIG Software Update

Printable Version

Dodge Forums >> Dodge Cars >> Dodge Avenger >> 2008 Dodge Avenger >> MyGIG Software Update

Page: [1] 2 3 4 5   next >   >>

Login Message << Older Topic   Newer Topic >>

MyGIG Software Update - 12/27/2007 10:46:24 AM    futil   Posts: 320 Joined: 9/11/2007 Status: offline I set up a web site to keep everything organized. I will notify everyone in the forums when a new release is out and available.   Click the link below to visit the site.   The Unofficial MyGIG Information Site     < Message edited by futil -- 4/6/2008 11:48:54 PM > Post #: 1

RE: MyGIG Software Update - 12/27/2007 5:05:59 PM    SueK   Posts: 235 Joined: 6/21/2007 Status: offline Harman Pecker head better get it right this time. < Message edited by SueK -- 12/27/2007 5:27:24 PM > _____________________________ 2008 Dodge Avenger SE Silver Steel Metallic (in reply to futil) Post #: 2

RE: MyGIG Software Update - 12/28/2007 6:15:57 PM    Silkk19 Posts: 28 Joined: 9/14/2007 Status: offline Thanks for that update.  I just installed it today and everything worked just like you said. _____________________________ 2008 Avenger AWD R/T (in reply to SueK) Post #: 3

RE: MyGIG Software Update - 12/28/2007 6:21:11 PM    Voodoo Avenger   Posts: 21 Joined: 11/30/2007 Status: offline just curious...is there a detailed list of which "problems" this update addresses? (in reply to futil) Post #: 4

RE: MyGIG Software Update - 12/29/2007 12:07:41 AM    futil   Posts: 320 Joined: 9/11/2007 Status: offline Aside of what I listed which is based on what I have seen from installing the update, from what others are saying after installing the update and the input from a Harman Becker tech, there is no formal list since the update hasnt been officially released yet. (in reply to Voodoo Avenger) Post #: 5

RE: MyGIG Software Update - 12/29/2007 7:06:50 PM    needforsleep   Posts: 75 Joined: 5/13/2007 Status: offline Do you know if this is for REN and RER radios?  REN = No navigation and RER = With Navigation. The reason I ask is that I have an RER in my 08 Avenger and I have an REN in my 08 Caravan. I know they are both Harman radios but they are physically different with the different buttons on the front. < Message edited by needforsleep -- 12/29/2007 7:09:43 PM > _____________________________ 2008.5 Dodge Avenger SXT - 2.4L Steel Grey - All Options Including REN MyGig + Rear Seat Video (in reply to futil) Post #: 6

RE: MyGIG Software Update - 12/29/2007 8:25:59 PM    futil   Posts: 320 Joined: 9/11/2007 Status: offline  That's actually a pretty good question.. This upgrade has been installed successfully on MyGIG radios with navigation but I don't know if it will work or was meant to be applied to the non navigational MyGIG radios.   The install is 564MB so based off of the size I would assume navigational data will be updated. I just contacted Harman Becker and asked them if the same patch will work on non-navigational MyGIG radios, I also asked that if there is a different installation image will an update be offered for that radio. I'll let you know when I hear back from them. (in reply to needforsleep) Post #: 7

RE: MyGIG Software Update - 12/30/2007 4:32:46 AM    futil   Posts: 320 Joined: 9/11/2007 Status: offline I heard back from Harman Becker.. They said that this update will not work with REN (NON Nav) radios because the REN MyGIG radios have a different architecture inside them. You also can not update them to be a RER (Nav enabled) radio. If you tried using this patch on a non nav radio it would refuse installation. There currently is an officially released update for the non nav radio but they said that there are very few changes that the user would notice. Send an email including your name and Address and ask for a REN software update CD to Steve Montealegre at Harman Becker ( SMontealegre@harmanbecker.com ) and he will send you an upgrade CD for the MyGIG REN. So to answer your question.. This patch is only for MyGIG radios with Navigation. (in reply to futil) Post #: 8

RE: MyGIG Software Update - 12/30/2007 6:24:23 AM    jt239   Posts: 3 Joined: 12/30/2007 Status: offline I tryed the update and it seemed to work but when I returned to my vehicle the nav was freakin out.  It is trying to update again and keeps giving "serious error (1200)"  Can anybody help?? The unit wont respond to anything I do...I want to put the disc back in and try the update again hoping it will clear the error.  Any ideas, I am desperate at this point.  Thank you. (in reply to futil) Post #: 9

RE: MyGIG Software Update - 12/30/2007 9:30:57 AM    needforsleep   Posts: 75 Joined: 5/13/2007 Status: offline futil, you might want to edit the title of this thread and edit your main thread so no one attempts to update their REN radio with this file. I emailed the Harman rep and requested an REN update for my 08 Caravan since I have had an annoying bug that happens when attempting to play a bad file.  The system will lock itself down. :( _____________________________ 2008.5 Dodge Avenger SXT - 2.4L Steel Grey - All Options Including REN MyGig + Rear Seat Video (in reply to futil) Post #: 10

RE: MyGIG Software Update - 12/30/2007 9:35:48 AM    needforsleep   Posts: 75 Joined: 5/13/2007 Status: offline I forgot to ask, but after the flash update do you loose your personal information that was stored on the drive, like photos, music files, Destination Entries, Bluetooth pairings, etc? < Message edited by needforsleep -- 12/30/2007 9:38:57 AM > _____________________________ 2008.5 Dodge Avenger SXT - 2.4L Steel Grey - All Options Including REN MyGig + Rear Seat Video (in reply to needforsleep) Post #: 11

RE: MyGIG Software Update - 12/30/2007 11:20:06 AM    futil   Posts: 320 Joined: 9/11/2007 Status: offline For the Nav freaking out issue, I heard others with that problem saying that all you need to do is drive for a while and it fixes itself but I don't recall anyone saying that they had a message "serious error (1200)" Try driving for a while and see if that helps.. if not try reinstalling the patch.. After the install is complete, and the system restarts.. When you see the message asking you to install the same Version number again select no then remove the CD. It may be possible that you started another install then removed the CD before it was done.. (Just guessing) All of my files and settings are still there after the patch.. I have been on vacation since my install and haven't had the chance to really check out all the features so I may have a freaking out nav too.. Anyone that has problems with this patch, Try not to panic too much as the official patch is coming out soon and you should be able to apply it over this one which should fix any issues you are having and as soon as I get the official patch ill post it for you all.. The install should stop anyone trying to install on a REN plus if people read a little into this post they should see which radio its for.. Worst case scenario would be wasted time.. I was planning on adding the REN install to this post so I just added a note above the download link for now... < Message edited by futil -- 12/30/2007 11:34:38 AM > (in reply to needforsleep) Post #: 12

RE: MyGIG Software Update - 12/30/2007 12:16:36 PM    jt239   Posts: 3 Joined: 12/30/2007 Status: offline Thank you for the response.  I ended up pulling the fuse because the screen stayed on after i removed the key and opened the door.  I never waited long enough to see if it would timeout, I guess i could try that.  But the screen wont open for me to put the disc back in...its possible I may have made a mistake and hit yes, again, to reinstall after the software installed.  No response from any buttons...it just keeps cycling like its trying to install an update but there is no disk in there.  i even downloaded to a usb drive and tryed that with no luck...  (in reply to futil) Post #: 13

RE: MyGIG Software Update - 12/30/2007 12:28:04 PM    lwoods01   Posts: 2 Joined: 12/29/2007 Status: offline futil, I'm new here... thanks for all the info.  You've been really helpful. I downloaded the patch and applied it last night.  My former version was 9.041.  I followed your directions - knowing that the whirring noise was okay helped too.  After about 15 minutes, the system rebooted itself and showed another diagnostic screen (something like "frontal filters updated). Then something strange thing happened.  The CD would not eject.  I tried turning the power on and starting the car several times.  When I was about to give up in despair, the CD ejected.  Everything appears to be working now. After rereading your instructions, I realized that the motor was not running during the install.  I don't know whether that had any impact on the install or not, but it makes me wonder. < Message edited by lwoods01 -- 12/30/2007 11:39:30 PM > (in reply to futil) Post #: 14

RE: MyGIG Software Update - 12/30/2007 10:14:47 PM    futil   Posts: 320 Joined: 9/11/2007 Status: offline When the update CD is installing it is extremely important not to interrupt the installation until you see the screen asking you to install the same version again. I think I need to change the install instructions to include that screen so no one else will make that mistake because it is difficult to figure out when to stop the installation.. There is no "Your installation is complete" message it just asks you to upgrade to the same version that has just been installed again. Lwoods01, The recommendation that you leave the car running in the instructions was added by me and while it isn't a requirement to install the CD correctly it will make you more comfortable while waiting for the CD to install and will make sure that you wont accidentally run the battery down making sure that the radio has enough voltage during the install which is just a precaution. but if you leave the engine off it shouldn't make a difference. I also figured there would be less of a chance that someone would try to start the car halfway through installation after they decided that they were freezing their asses off which would cause the install to fail. The radio is a lot like a computer where if you are installing an operating system in a computer then you eject the CD before it is complete you end up with an unbootable computer and in this case.. an unbootable radio. Computers usually allow you to eject the CD and try again however the radio uses the software to instruct the hardware eject the CD and if the software is corrupted then it will not eject since the radio cant get to the point where it can load the code to eject the CD. JT239, If your radio is totally unresponsive and you can't get the CD door to open then the chances are that the radio does not have enough of the patch installed to boot correctly. On almost all CD ROM drives on computers there are emergency eject levers or buttons which are small holes in the CD-ROM that you can use to insert a paperclip to get them to open in the case of a jam (Micro buttons on Macs with thin drives). The MyGIG clearly wasn't designed as a computer but I will look and try to find a way to get it to forcefully eject so that you can get that CD back in which is what needs to be done to get your radio going again. If you cant reinstall that image the only other option will be having to bring the car back to the dealer which might not be so bad cause you will likely get a new radio :) but if it does come to that just tell them that the radio suddenly stopped working and you have no clue why. (Anyone that has a problem with that statement being false, get over it cause dealers frequently lie to the customer to make a sale and this is how the customers get even.. its just the great chain life (or retail sales) :)  (in reply to lwoods01) Post #: 15

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
SRT Forums
Race News

Dodge Prices

Dodge Trucks & SUVs
Ram Dakota
Durango Nitro

Dodge Cars
Avenger Intrepid
Caliber Magnum
Challenger Neon
Charger Stealth
Daytona Stratus
Dodge Viper

Featured Sponsors

Car of the Month
May 2008
2003 Neon SRT-4

Ride of the Month
May 2008
2005 3500 QCLB Laramie Sport 5.9L CTD Auto

Poll
Now that you've seen the 2008 Dodge Challenger SRT-8, what do you think?
	I Love It, Its Perfect
	I love the looks, but hate the transmission
	I like it, but I want the concept interior
	I like it, but I want the exact concept exterior
	Its ok, but the concept was far better
	Thanks, but I look forward to some changes on the 2009 models.
Poll Results Previous Polls

Top 10 Posters
dustyloins 20386 badstratrt 20284 midnight 16848 vipergts 14303 dodgegirl19 13072 ramfan5.9 12398 steve05ram36 11138 nickoman01 10860 drew 9991 casper 9604

New Vendors
ATI ProCharger
Motor City Auto Parts
Sonic Electronix
Buy Auto Truck Accessories
Buy Car Floor Mats
Access Roll-Up Cover
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
Royal Purple
DodgeChallenger.com