|
jookie7705 -> RE: Please help. Had oil changed and put wrong oil. Synthetic. (12/25/2007 6:41:45 AM)
|
I find quite a bit of techs/mechanics in my area don't know much about our cars or make incredibly wrong assumptions. I've had a guy tell me that my Stealth was a DSM and had a stereo installer tell me that I couldn't put a double DIN stereo in my car since Dodge manufactures a lot of their cars with 1 1/2 DIN. So it's important you learn as much as you can about the 3S cars if you intend to keep it awhile. Make sure you check out the "3S Resources" posts in this forum. I use full synthetic 10W30. Flushing the engine oil before upgrading to synthetic is a good idea to clear engine deposits. However, on older cars (yours is now 14 years old), some of these deposits can help maintain internal seals so you don't want to remove them all. As far as the lifter tick goes, a 1993 is considered a 1st gen. The lifters in these engines have a 1mm opening which is prone to the "ticking" noise you hear, but usually subsides after the oil has circulated. Using the lower weight oil probably is making this worse in your case. You can find 3rd gen lifters with a 3mm opening to install, which'll get rid of your ticking problem. Here's a great write up on engine oils: http://www.carbibles.com/engineoil_bible.html
|
|
|
|