|
steve05ram360 -> DIY threads (11/25/2007 2:53:43 PM)
|
The start of a 2nd gen Dak/1st gen Durango DIY thread... I will add to this as the DIY's are written, if you have any, send me a pm with a link to it and I will add it here.
These DIY writeups should be done at your own risk, I am not responsible for any mishaps while your wrenching... Always consult a manual before attempting any wrenching and I advise you to stay within your skill set. If your expanding your skills, work on the easy stuff 1st to gain skills and the necessary scars on the hands to fall into the "working man/woman" catagory [:D]
If you are writing one, look at the T-Case one below and see how I did it. use it as a guide.
These DIY's are on a Dak but should work on a Durango as well... please feel free to speak up if you know otherwise...
1. 2nd gen dakota Transfer Case removal
2. Quick Drain Valve from Fumoto Engineering
3. Rack & Pinion Steering Swap (4WD)
4. DIY Throttle Positon Sensor Fix.
5. DIY Front Brake Threading Issues.
1. 2nd gen dakota Transfer Case removal
http://www.dodgeforum.com/m_1011084/tm.htm
2. Quick Drain Valve from Fumoto Engineering
http://www.fumotousa.com/
3. Rack & Pinion Steering Swap (4WD)
http://www.dodgeforum.com/m_1059233/tm.htm
4. DIY Throttle Positon Sensor Fix.
http://www.dodgeforum.com/m_1059612/mpage_1/key_/tm.htm#1059612
5. DIY Front Brake Threading Issues.
http://www.dodgeforum.com/m_1230920/tm.htm
|
|
|
|
