I recently baught a 95 stealth tt awd model. I have a few questions regarding the exhaust... Is there only 1 o2 sensor in the exhaust? If there is more, is there a pre cat o2 and a after cat o2? Can I just unbolt the stock cat and bolt in a test pipe from this web site? http://www.3sx.com/store/comersus_vi...idProduct=1028
Thanks for your help, Jeff

__________________
1999 Dodge Ram Sport

20% tint on driver and passanger windows, access roll cover, and more mods to come!

depends if its the cali. model then yes there is easy way to tell is to look on the back side of the intake manifold[:@] if there is a tube for the egr thing then yes you have an o2 senscor back there, if the tube is not there then you only have the one on the bottom under the shifter hope that cleared some stuff up for you

__________________

1993 Dodge Stealth*High Comp Pistons* *Stage 2 Clutch* *Plus More*

1995 Dodge Dakota 318 *K&N* *Magnaflow Exhaust*

So nobody knows if there is 1 o2 sensor or 2?
Also nobody has ever ran a test pipe on a stealth? This forum must be dead. By the way there is no emissions testing here.

__________________
1999 Dodge Ram Sport

20% tint on driver and passanger windows, access roll cover, and more mods to come!

Above he just gave you a answer... And yes I used a test pipe they work fine and gives around 5-7 horsepower.

yes u can do if it is not from califonia i did it to my car its sounds alot deeper and has more torque

__________________

1993 Dodge Stealth*High Comp Pistons* *Stage 2 Clutch* *Plus More*

1995 Dodge Dakota 318 *K&N* *Magnaflow Exhaust*

Sounds good, thanks guys. Did you order yours from that site, or did you have one welded in?

To the above people... were your cars the Twin turbo awd edition also, or non turbo?

__________________
1999 Dodge Ram Sport

20% tint on driver and passanger windows, access roll cover, and more mods to come!

Mine was N/A but the gains and everything should be the same either way.

obd1 cars usually have 1 o2 sensor ('95 models below). obd2 cars have 2 o sensor ('96 up models).

mine was the tt but it blew oil so i modied a n/a to do the same hp i used the pipe but it will be a tight fit

__________________

1993 Dodge Stealth*High Comp Pistons* *Stage 2 Clutch* *Plus More*

1995 Dodge Dakota 318 *K&N* *Magnaflow Exhaust*

Danny, so you used the bolt in setup or you welded in a custom bent piece?
Also since my 95 is right on the line, is there a pre cat o2 and a post cat o2?
Thanks for all your help, Jeff

__________________
1999 Dodge Ram Sport

20% tint on driver and passanger windows, access roll cover, and more mods to come!