Yesterday morning my truck did not start. I replaced the battery about 2 weeks ago. When I attempt to start the truck, all I get is the starter turning and the gas, check engine, and security lights light up and the odometer starts to blink then posts "no bus".
I have checked the fuses, and replaced the engine and starter relays...and still nothing.
Please help!
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Dodge Forums!
No Bus also means something has taken the bus system down from the 5 volt feed to the controller. Try unplugging the crank sensor, that would on the right side of the engine block above the starter. this is for the 4.7 engine.Try starting the engine. If the engine starts and run then you need that sensor.Or keep unplugging sensor until the odometer no bus is gone, The engine run the cam sensor, but not very well.
__________________
Master Chassis tech, Transmission
Automatic and Manual and Suspensions.
Also repair front and rear diffs and all engine
repairs inc Diesel. A/C repair too.
We towed the truck to the dealer, they hooked it up to the "magic machine" ($87) they got nothing, no feedback, so they began troubleshooting and finally said...the PCM is bad and needs to be replaced. Of course our warranty has expired and they quoted us $750 if they order/replace/hookup. We have called around to order the part so we can insall it ourselves. Hopefully, all we'll need the dealer for is toFLASHthe new PCM...hopefully that will save us a little on labor cost. Do any of you know where we can find a new PCM? All the local auto part stores don't carry it or can not get that particular piece. The cheapest we've found is $294.
Any suggestions or comments are welcomed and thanks for the input!
We towed the truck to the dealer, they hooked it up to the "magic machine" ($87) they got nothing, no feedback, so they began troubleshooting and finally said...the PCM is bad and needs to be replaced. Of course our warranty has expired and they quoted us $750 if they order/replace/hookup. We have called around to order the part so we can insall it ourselves. Hopefully, all we'll need the dealer for is toFLASHthe new PCM...hopefully that will save us a little on labor cost. Do any of you know where we can find a new PCM? All the local auto part stores don't carry it or can not get that particular piece. The cheapest we've found is $294.
Any suggestions or comments are welcomed and thanks for the input!
Have you checked the local boneyards????? Sorry to hear the bad news BTW...
__________________
2003 4.7 sport
3" Magnaflow catback
K&N CAI
HO upgrade (cams and intake)
"What we are dealing with here is a complete lack of respect for the law."